Roaming Windows User Profiles

From SambaWiki

Introduction

A Windows profile is a set of files that contains all settings of a user including per-user configuration files and registry settings. In an Active Directory or NT4 domain you can set that the profile of a user is stored on a server. This enables the user to log on to different Windows domain members and use the same settings.

When using roaming user profiles, a copy of the profile is downloaded from the server to the Windows domain member when a user logs into. Until the user logs out, all settings are stored and updated in the local copy. During the log out, the profile is uploaded to the server.



Windows Roaming Profile Versions

Depending on the operating system version, Windows uses separate profile folders for a user to support Windows version-specific features. Version 2 profiles and later append the .V* suffix to the user's profile folder.

The following Windows profile versions exist:

Windows Client OS Version Windows Server OS Version Profile Suffix Example Profile Folder Name
Windows NT 4.0 - Windows Vista Windows NT Server 4.0 - Windows Server 2008 none user
Windows 7 Windows Server 2008 R2 V2 user.V2
Windows 8.0 - 8.1* Windows Server 2012 - 2012 R2* V3 user.V3
Windows 8.1* Windows Server 2012 R2* V4 user.V4
Windows 10 (1507 to 1511) Windows Server 2016 V5 user.V5
Windows 10 (1607 and later) V6 user.V6
* Using the default settings, Windows 8.1 and Windows Server 2012 R2 use V3 profiles. However, the profiles are incompatible with Windows 8.0 and Windows Server 2012. For this reason it is recommended that you configure Windows 8.1 and Windows Server 2012 R2 to use V4 profiles. For further details, see: Incompatibility between Windows 8.1 roaming user profiles and those in earlier versions of Windows.

When you set the profile path for a user, you always set the path without any version suffix. For example:

\\server\profiles\user_name



Setting up the Share on the Samba File Server

Using Windows ACLs

To create a share, for example, profiles for hosting the roaming profiles on a Samba file server:

  • Create a new share using these lines.
 [profiles]
         comment = Users profiles
         path = /srv/samba/profiles/
         ;browseable = No
         read only = No
         csc policy = disable
         vfs objects = acl_xattr

As 'root':

mkdir -p /srv/samba/profiles
chown root:"Domain Admins" /srv/samba/profiles
chmod 0770 /srv/samba/profiles




Set the following permissions:

  • Share tab permissions:
Principal Allow
Everyone Full Control / Change / Read
  • Security tab file system permissions on the root of the profiles share:
Principal Access Applies to
Domain Users * Traverse folder / execute file
List folder / read data
Create folder / append data
This folder only
CREATOR OWNER Full control Subfolders and files only
Domain Admins Full control This folder, subfolders and files
SYSTEM ** Full control This folder, subfolders and files
* You can alternatively set other groups, to enable the group members to store their user profile on the share. When using different groups, apply the permissions as displayed for Domain Users in the previous example.
** For details, see The SYSTEM Account.
Verify that permission inheritance is disabled on the root of the share. If any permission entry in the Advanced Security Settings window displays a path in the Inherited from column, click the Disable inheritance button. On Windows 7, unselect the Include inheritable permissions from this object's parent check box to set the same setting.
Profiles Folder File System ACLs.png

These settings enable members of the Domain Users group to store their roaming profiles on the share, without being able to access other user's profiles. Members of the Domain Admins group are able to access all directories on the share.

Using POSIX ACLs on a Unix domain member

On a Unix domain member server, you can set up the profiles share using POSIX ACLs instead of using Windows access control lists (ACL). This will not work on a Samba Active Directory Controller.




  • Add the following share configuration section to your smb.conf file:
 [profiles]
         comment = Users profiles
         path = /srv/samba/profiles/
         browseable = No
         read only = No
         force create mode = 0600
         force directory mode = 0700
         csc policy = disable
         store dos attributes = yes
         vfs objects = acl_xattr
For details about the parameters used, see the descriptions in the smb.conf(5) man page.
  • Create the directory and set permissions:
# mkdir -p /srv/samba/profiles/
# chgrp -R "Domain Users" /srv/samba/profiles/
# chmod 1750 /srv/samba/profiles/
These settings enable members of the Domain Users group to store their roaming profiles on the share, without being able to access other user's profiles. Alternatively, you can set a different group.
  • Reload Samba:
# smbcontrol all reload-config



Assigning a Roaming Profile to a User

Depending on the Windows version, Windows uses different folders to store the roaming profile of a user. However, when you set the profile path for a user, you always set the path to the folder without any version suffix. For example:

\\server\profiles\user_name

For further details, see The Windows Roaming Profile Versions.

Note that you must not set a trailing backslash.


In an Active Directory

Using Active Directory Users and Computers

In an Active Directory, you can use the Active Directory Users and Computers Windows application to set the path to the user's profile folder. If you do not have the Remote Server Administration Tools (RSAT) installed, see Installing RSAT.

To assign \\server\profiles\demo as profile folder to the demo account:

  • Log in to a computer using an account that is enabled to edit user accounts.
  • Open the Active Directory Users and Computers application.
  • Navigate to the directory container that contains the demo account.
  • Right-click to the demo user account and select Properties.
  • Select the Profile tab.
  • Fill the path to the home folder into the Profile path field.
Set the path always without any profile version suffix and without trailing backslash. For details, see The Windows Roaming Profile Versions.
ADUC Set Profile Folder.png.
  • Click OK.

The setting is applied the next time the user logs in.


Using a Group Policy Object

Using group policy objects (GPO), you can assign settings to organizational units (OU) or to a domain. This enables you, for example, to automatically assign profile paths to all users that log on to a computer that is a member of the OU or domain. If you move the computer to a different OU or domain, the setting is removed or updated. Using this way, you do not have to assign manually the settings to each user account.

To create a group policy object (GPO) for the domain that automatically assigns the \\server\path\user_name path to every user that logs on to a Windows domain member:

  • Log in to a computer using an account that is allowed to edit group policies, such as the AD domain Administrator account.
  • Open the Group Policy Management Console. If you are not having the Remote Server Administration Tools (RSAT) installed on this computer, see Installing RSAT.
  • Right-click to your AD domain and select Create a GPO in this domain, and Link it here.
GPMC Create GPO.png
  • Enter a name for the GPO, such as Profiles on server. The new GPO is shown below the domain entry.
  • Right-click to the newly-created GPO and select Edit to open the Group Policy Management Editor.
  • Navigate to the Computer ConfigurationPoliciesAdministrative TemplatesSystemUser Profiles entry.
  • Double-click the Set roaming profile path for all users logging onto this computer policy to edit:
  • Enable the policy and set the profile path. For example:
\\server\profiles\%USERNAME%
Windows replaces the %USERNAME% variable with the user name during login. Set the path without trailing backslash.
GPME Set Profiles Properties.png
  • Click OK.
  • Close the Group Policy Management Editor. The GPOs are automatically saved on the Sysvol share on the domain controller (DC).
  • Close the Group Policy Management Console.

The GPO is applied at the next reboot of the Windows domain members or when they reload the group policies.


Using ldbedit on a Domain Controller

On a domain controller (DC), to assign, for example, the \\server\profiles\demo\ path as profile folder to the demo account:

  • Edit the demo user account:
# ldbedit -H /usr/local/samba/private/sam.ldb 'sAMAccountName=demo'
  • The accounts attributes are displayed in an editor. Append the following attribute and value to the end of the list:
profilePath: \\server\profiles\demo
You must not set a trailing backslash to the path.
  • Save the changes.

The setting is applied the next time the user logs in.


In an NT4 Domain

In an Samba NT4 domain, to set \\server\profiles\%U as path to the profile folder:

  • Add the following parameter to the [global] section in your smb.conf file:
logon path = \\%L\Profiles\%U
During logging in to the domain member, Samba automatically replaces the %U variable with the session user name. For further details, see the Variable Substitutions section in the smb.conf(5) man page.
  • Reload Samba:
# smbcontrol all reload-config



Configuring Windows Profile Folder Redirections

See Configuring Windows Profile Folder Redirections.