Using Git for Samba Development
The previous pages based on the git-svn mirror can be found at Using Git-SVN for Samba Development (deprecated)
Samba source code is now hosted in a shared git repository to which all existing Samba Team members are allow to push to. If you are a Team member and do not have an account on git.samba.org, please email the team list and let the appropriate people know. This shared repository has the same work flow as was used when the SCM of choice was Subversion. In other words, you develop in your local tree and push to the repo although is not necessary to push after every commit. This should be a familiar work flow for those who have used svk.
- The git source code is available from http://www.kernel.org/pub/software/scm/git/.
- The project home page is located at http://git.or.cz/.
- You should probably familiarize yourself with the Git tutorial.
The examples in the following sections are based off of the tools and syntax used by git v1.5.3 or later which is the recommended version for Samba. Either apt-get, yum, or make install the tools. See Git documentation for more details on this part.
Note that under Debian or Ubuntu, git is distributed in the git-core package. The git package contains the "GNU Interactive Tools".
If you are on OS X, both MacPorts and Fink contain working binary packages of Git. Building Git from source on OS X works fine, but resolving the chain of dependencies for asciidoc (which is needed to build the man pages) is very painful.
Basic Samba Git
Step Zero is to set your name and email address for commits:
$ git config --global user.email Your.Email@domain.com $ git config --global user.name "Your Real Name"
Next, clone the repository:
$ git clone git://git.samba.org/samba.git samba Initialized empty Git repository in /home/AD/gcarter/src/git/tmp/samba/.git/ remote: Generating pack... remote: Done counting 440544 objects. remote: Deltifying 440544 objects... remote: 100% (440544/440544) done Indexing 440544 objects... remote: Total 440544 (delta 340808), reused 436199 (delta 336480) 100% (440544/440544) done Resolving 340808 deltas... 100% (340808/340808) done $ cd samba
List local and remote branches:
$ git branch * v3-2-test
$ git branch -r origin/HEAD origin/v3-0-stable origin/v3-0-test origin/v3-2-stable origin/v3-2-test
Listing tags matching release-3-0-3*
$ git tag -l release-3-0-3* release-3-0-3 release-3-0-3pre1 release-3-0-3pre2 release-3-0-3rc1
Creating your own working branch from v3-2-test:
$ git checkout -b my_branch origin/v3-2-test Branch my_branch set up to track remote branch refs/remotes/origin/v3-2-test. Switched to a new branch "my_branch"
Do your own local work:
$ mkdir git-test $ echo "hello" > git-test/README
View status of changes
$ git status # On branch my_branch # Untracked files: # (use "git add <file>..." to include in what will be committed) # # git-test/ nothing added to commit but untracked files present (use "git add" to track)
Add our new file to the local branch index:
$ git add git-test $ git status # On branch my_branch # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # new file: git-test/README #
$ git commit -m "Example file for HOWTO" Created commit ad9a1eb: Example file for HOWTO 1 files changed, 1 insertions(+), 0 deletions(-) create mode 100644 git-test/README
Do some more work and commit local changes....
Now fetch the remote branch history:
$ git fetch
Merging remote branch changes:
$ git merge origin/v3-2-test Already up-to-date.
To present your patchset properly to other developers, please rebase your patches against the branch you are developing against. In particular, if you are developing for Samba 3, please regularly do a
$ git rebase origin/v3-2-test
Obviously replace "origin/v3-2-test" by "origin/master", "origin/v3-4-test" or whatever branch you are developing against. If you have created a mess in your local patch queue, "git rebase -i" might help you out.
Push the changes to the shared repository
$ git push ssh://git.samba.org/data/git/samba.git my_branch:v3-2-test updating 'refs/heads/v3-2-test' using 'refs/heads/my_branch' from f2252e041e075e19bf27e53ab3ed62f39bc8b3e2 to ad9a1eb599c125964ac3e198d3003841edb4c54e Generating pack... Done counting 5 objects. Result has 4 objects. Deltifying 4 objects... 100% (4/4) done Writing 4 objects... 100% (4/4) done Total 4 (delta 1), reused 0 (delta 0) refs/heads/v3-2-test: f2252e041e075e19bf27e53ab3ed62f39bc8b3e2 -> ad9a1eb599c125964ac3e198d3003841edb4c54e
Explanation of Branches
The simplest way to explain the existing shared branches is to associate them with the previous SVN ones.
- The *-unstable tags point to the matching SAMBA_X_X branch (e.g. SAMBA_3_2 or SAMBA_4_0) at the time of the migration. These are now tags and not branches, so you cannot push to them. Instead, your local work should be done in a local branch and pushed when completed. There is no need to push work in progress any longer unless you require some specific testing by the buildfarm.
- The master branch is the new combined Samba 3 (was: v3-devel) and Samba 4 (was: v4-0-test) development branch. It includes Samba 3 sources in a directory called source3 and Samba 4 sources in a directory called source4. Anyone may check into this branch.
- The *-test branches correspond to the release series dev branch (e.g. SAMBA_3_2_0). Anyone may check into these branches.
- The *-stable branches are used for release purposes similar to the SAMBA_X_X_RELEASE branches in SVN. These are under the control of the current release manager for a given release series.
- The v3-devel branch was the former Samba 3 development branch. It has been turned readonly during the introduction of the master branch. The master branch replaces v3-devel.
- The v4-0-test branch was the former Samba 4 development branch. It has been turned readonly during the introduction of the master branch. The master branch replaces v4-0-test.
Q. How do I revert a commit?
A. The "git reset" command allows you to reset the HEAD of the branch to any given point in history. To go back one commit, run "git reset HEAD^". This will keep your local changes and you can make any additional changes before re-commiting the new work. Also see the "git commit --amend" command and the "git reset" man page for other examples.
Q. Is there a shorthand for git push <URL> <local_repo:remote_repo>?
A. Yes. You can define a [remote "upstream"] section in your local repos .git/config file.
$ git config remote.origin.url ssh://git.samba.org/data/git/samba.git $ git config remote.origin.push my_branch:v3-2-test $ cat .git/config ... [remote "origin"] url = ssh://git.samba.org/data/git/samba.git fetch = +refs/heads/*:refs/remotes/origin/* push = my_branch:v3-2-test [branch "my_branch"] remote = origin merge = refs/heads/v3-2-test
Q. How can I have access to the old CVS and SVN imported repositories via GIT without creating additional cloned repos?
A. You can add remote tracking repositories using "git remote":
$ git remote add cvs git://git.samba.org/import/samba-cvsimport.git $ git fetch cvs remote: Generating pack... remote: Done counting 7070 objects. Result has 5004 objects. remote: Deltifying 5004 objects... remote: 100% (5004/5004) done Indexing 5004 objects... remote: Total 5004 (delta 3836), reused 4098 (delta 3044) 100% (5004/5004) done Resolving 3836 deltas... 100% (3836/3836) done 461 objects were added to complete this thin pack. * refs/remotes/cvs/APPLIANCE_HEAD: storing branch 'APPLIANCE_HEAD' of git:// git.samba.org/import/samba-cvsimport commit: af0e201
You can then see the remote branches using "git branch -r" and work with them in the same way you did for the "origin" branches obtained in the initial "git clone".
Q. How can I maintain a feature branch against the upstream Samba branches?
A. You clone the Samba repository as per the instructions above. Then you make a new feature branch from v3-2-test:
$ git branch feature/foo v3-2-test
Now you do your development in your feature branch. Any time the v3-2-test branch gets too different to the code in your feature branch you should rebase your feature branch. The rebase rewinds your feature branch to the point there it was branched. Then it updates you feature branch to the HEAD of the v3-2-test branch and re-applies your changes.
$ git rebase v3-2-test First, rewinding head to replay your work on top of it... HEAD is now at 357f003... Add WERR_SERVICE_ALREADY_RUNNING. ... Wrote tree 02299ef7c1cfa093248bfd9c6e3812805718845e Committed: e20a8c521d7860d9b7bd724ed5ea19c7306530ab
Rebase works best when you use it for local branches that are never pushed to a public repository, see Why won't "git push" work after I rebased a branch?.
Suggestions for .gitconfig
In order to comply with Samba coding standards and not add new trailing whitespace (see: Samba Coding Standards Document) it is suggested to put:
[apply] whitespace = strip
into your $HOME/.gitconfig file.
That way, whenever you apply a patch using git-am or rebase your work on top of the upstream trees with git-rebase, all newly added whitespace is nicely removed automatically.