Difference between revisions of "User:Sgonzalez/Samba 4 OS requirements/Gentoo"

From SambaWiki
(Created page with "=== Gentoo === Please note that the following sections assume at least an intermediate understanding of the Gentoo packaging system. ==== Python ==== Gentoo uses python-3 as the…")
 
 
(2 intermediate revisions by the same user not shown)
Line 7: Line 7:
 
# emerge --ask '<dev-lang/python-3'
 
# emerge --ask '<dev-lang/python-3'
 
# eselect python list # '''Note the index number of the python-2 installation'''
 
# eselect python list # '''Note the index number of the python-2 installation'''
# eselect python set <# of python 2 from previous command>
+
# eselect python set <index number of python 2 from previous command>
 
# python-updater
 
# python-updater
   
 
==== Kerberos ====
 
==== Kerberos ====
On Gentoo, you have two choices for a kerberos implementation, app-crypt/mit-krb5 and app-crypt/heimdal. Unfortunately the two implementations can not be installed at the same time. Currently, the Samba developers recommend using heimdal. So we must first uninstall mit-krb5 (if installed,) install heimdal and rebuild any packages that were using the old kerberos implementation.
+
On Gentoo, you have two choices for a kerberos implementation, '''app-crypt/mit-krb5 and app-crypt/heimdal'''. Unfortunately the two implementations can not be installed at the same time. Currently, the Samba developers recommend using '''app-crypt/heimdal''. So you must first uninstall ''app-crypt/mit-krb5'' (if installed,) then install '''app-crypt/heimdal''' and rebuild any packages that were using the old kerberos implementation.
   
 
# emerge --unmerge --ask app-crypt/mit-krb5
 
# emerge --unmerge --ask app-crypt/mit-krb5
Line 18: Line 18:
   
 
==== Bind ====
 
==== Bind ====
To enable automatic zone management with bind, bind (and bind-tools) should be emerged with the USE flags for berkdb, dlz and gssapi set.
+
To enable automatic zone management with bind, bind (and bind-tools) should be emerged with the USE flags for '''berkdb''', '''dlz''' and '''gssapi''' set.
To enable them permanently, add the following to /etc/package.use
+
To enable them permanently, add the following to '''/etc/package.use''':
   
 
net-dns/bind berkdb dlz gssapi
 
net-dns/bind berkdb dlz gssapi
 
net-dns/bind-tools gssapi
 
net-dns/bind-tools gssapi
   
Then, emerge bind:
+
Then, emerge '''net-dns/bind''':
   
 
# emerge --ask net-dns/bind net-dns/bind-tools
 
# emerge --ask net-dns/bind net-dns/bind-tools
Line 36: Line 36:
   
 
==== Samba-supplied Libraries (tdb/ldb/tevent) ====
 
==== Samba-supplied Libraries (tdb/ldb/tevent) ====
  +
There are a few Samba libraries that need to be installed, note that at this time these packages are keyworded as unstable, so you will need to add the following to your '''/etc/package.keywords''':
'''Please use this as a reference point only''', anywhere there is an = after and emerge command, it is installing a specific version, this can cause issues with newer samba releases.
 
   
  +
~sys-libs/tevent-0.9.17
# USE="dlz python gssapi" emerge cyrus-sasl heimdal bind bind-tools gnutls dnspython gdb libidn subunit
 
  +
~sys-libs/tdb-1.2.10
# ACCEPT_KEYWORDS="~amd64" USE="python" emerge =sys-libs/tdb-1.2.10 =sys-libs/tevent-0.9.15 =sys-libs/ldb-1.1.12
 
  +
~sys-libs/ldb-1.1.12
Obviously that would be ~x86 instead of ~amd64 on a x86 arch, also don't forget to
 
  +
# eselect python set 1
 
  +
Additionally, Samba requires '''sys-libs/tdb''' to be emerged with the USE flag '''python''' set. To enable this permanently, add the following to '''/etc/package.use''':
where 1 is python 2.X (3.X is not yet supported) if you don't know which version you are using, '''eselect python list''' will give you a list of available ones.
 
  +
  +
sys-libs/tdb python
  +
  +
Now, emerge the packages:
  +
 
# emerge --ask '=sys-libs/tdb-1.2.10' '=sys-libs/tevent-0.9.17' '=sys-libs/ldb-1.1.12'
  +
  +
Note that ebuilds for the required versions of the above packages might not be availiable in the portage tree. In this case, check [https://bugs.gentoo.org/ Gentoo's Bugzilla] for updated ebuilds.

Latest revision as of 14:39, 11 September 2012

Gentoo

Please note that the following sections assume at least an intermediate understanding of the Gentoo packaging system.

Python

Gentoo uses python-3 as the default python interpreter, but at this time Samba requires python-2 (2.4.2 or greater) The following set of commands will install and set up python-2 as the default python interpreter.

# emerge --ask '<dev-lang/python-3'
# eselect python list # Note the index number of the python-2 installation
# eselect python set <index number of python 2 from previous command>
# python-updater

Kerberos

On Gentoo, you have two choices for a kerberos implementation, app-crypt/mit-krb5 and app-crypt/heimdal'. Unfortunately the two implementations can not be installed at the same time. Currently, the Samba developers recommend using app-crypt/heimdal. So you must first uninstall app-crypt/mit-krb5 (if installed,) then install app-crypt/heimdal and rebuild any packages that were using the old kerberos implementation.

# emerge --unmerge --ask app-crypt/mit-krb5
# emerge --ask app-crypt/heimdal
# revdep-rebuild -- -ask

Bind

To enable automatic zone management with bind, bind (and bind-tools) should be emerged with the USE flags for berkdb, dlz and gssapi set. To enable them permanently, add the following to /etc/package.use:

net-dns/bind berkdb dlz gssapi
net-dns/bind-tools gssapi

Then, emerge net-dns/bind:

# emerge --ask  net-dns/bind net-dns/bind-tools

Note that if you have problems with samba's gssapi updates to bind, try using the alternate kerberos implementation of app-crypt/mit-krb5.

Other Misc. Build/Run Dependencies

To ensure a successful Samba-4 installation, there are a few other packages that should be installed, as shown below:

# emerge --ask dev-libs/cyrus-sasl net-libs/gnutls dev-python/dnspython net-dns/libidn dev-python/subunit

Samba-supplied Libraries (tdb/ldb/tevent)

There are a few Samba libraries that need to be installed, note that at this time these packages are keyworded as unstable, so you will need to add the following to your /etc/package.keywords:

~sys-libs/tevent-0.9.17
~sys-libs/tdb-1.2.10
~sys-libs/ldb-1.1.12

Additionally, Samba requires sys-libs/tdb to be emerged with the USE flag python set. To enable this permanently, add the following to /etc/package.use:

 sys-libs/tdb python

Now, emerge the packages:

# emerge --ask '=sys-libs/tdb-1.2.10' '=sys-libs/tevent-0.9.17' '=sys-libs/ldb-1.1.12'

Note that ebuilds for the required versions of the above packages might not be availiable in the portage tree. In this case, check Gentoo's Bugzilla for updated ebuilds.