- 1 Introduction
- 2 Updating Multiple Samba Domain Controllers
- 3 The Update Process
- 4 Samba AD DC Database Check
- 5 Notable Enhancements and Changes
- 5.1 All Samba Installations
- 5.2 Samba Active Directory Domain Controllers
- 5.3 Samba Domain Members
The following documentation describes the process of updating Samba to a newer version.
If you want to migrate a Samba NT4 domain to Samba Active Directory (AD), see Migrating a Samba NT4 Domain to Samba Active Directory (Classic Upgrade).
Common Misconceptions About Samba 4
One of the common misconceptions is: "Samba 4" means "Active Directory only": This is wrong.
The Active Directory (AD) Domain Controller (DC) support is one of the enhancements in Samba 4.0. However all newer versions include the features of previous versions - including the NT4-style (classic) domain support. This means you can update a Samba 3.x NT4-style PDC to a recent version, like you updated in the past - for example from 3.4.x to 3.5.x. There is no need to migrate an NT4-style domain to an AD.
Additionally, all recent versions continue to support setting up a new NT4-style PDC. The AD support in Samba 4.0 and later is optional and does not replace any for the PDC feature. The Samba team understand the difficulty presented by existing LDAP structures. For that reason, there is no plan to remove the classic PDC support. Additionally we continue testing the PDC support in our continuous integration system.
Updating Multiple Samba Domain Controllers
If you are updating multiple Samba Active Directory (AD) Domain Controllers (DC), the recommended order is:
- Update one Samba AD DC that is is not holding any flexible single master operations (FSMO) role.
- Start Samba on the updated DC.
- Verify that the directory replication between all DCs is working correctly:
# samba-tool drs showrepl
- Test the installation to ensure that the new version works correctly.
- Upgrade all other Samba DCs one at a time and always verify that the replication is working correctly.
The Update Process
Run the following steps, regardless if you are updating a Samba Active Directory (AD) domain controller (DC), a Samba NT4-style PDC, a Samba domain member, or a standalone installation:
- Stop all Samba services.
- Create a backup.
- Read all release notes of versions since the one you are updating from. They contain important information on new features, changed parameter options, and so on.
- Install the latest version over your existing one:
- If you compile Samba from the sources, use the same "configure" options like for your previous version. For more information, see Build Samba From the Sources.
- If you update using packages, read the distribution documentation for information how to update.
- Start Samba.
- Start the same daemons like for your previous version:
- On Samba AD DCs: samba
- On Samba NT4-style PDC/BDCs: smbd, nmbd
- On Samba domain members: smbd, nmbd (winbind, if used)
- On Samba standalone hosts: smbd
- Only on Samba AD DCs: Run the Samba AD DC database check.
- Check your Samba log files for errors.
- Test your updated installation.
Samba AD DC Database Check
The "samba-tool" utility enables you to detect and fix problems in the Samba Active Directory (AD) database. For example, if a previous Samba version stored an attribute incorrectly and the updated version fixes the problem. You must run the check and fix command on every Samba AD DC locally, because some fixes apply to non-replicated attributes and modifications are not replicated to other DCs.
To check the AD database, run:
# samba-tool dbcheck --cross-ncs
To fix reported errors, run:
# samba-tool dbcheck --cross-ncs --fix
If you pass the "--yes" parameter to the command, all questions are automatically answered with "yes". Note that if you omit the "--yes" parameter, the database check executes three fsync() calls for each object. This can result result in a longer run duration. For example, passing the "--yes" parameter to the command fixed 3500 objects in 10 seconds in our test environment. Without this parameter, the command required 4:50 minutes for the same operation.
After a repair, re-check the database to verify a successful operation.
Notable Enhancements and Changes
If you are updating Samba, always read the release notes of all versions between the previous and the one you are updating to. They contain important and additional information on new features, changed parameter options, and so on.
This section provides an overview about important changes that require your attention to fix problems of previous versions, avoid a negative performance impact, and so on.
All Samba Installations
File Execution Permissions
Updating to 4.0.0 and later
Previously, Samba did not checked the execution bit of files. As a consequence, users could execute files like *.exe, *.bat, etc. on a share, even if the x-bit was not set. Samba has been enhanced and now denies to execute a file if the x-bit is not set. In situations, like when upgrading from a previous version, your executable files can miss the x-bit. As a workaround, you can enable the old behavior, if you set the following parameter for individual shares or in the [global] section:
acl allow execute always = true
Samba Active Directory Domain Controllers
Fixing replPropertyMetaData Attributes
Updating to 4.5.0 and later
Samba versions prior 4.5.0 stored the "replPropertyMetaData" attribute incorrectly. As a consequence, administrators could experience, for example, renaming conflicts. The problem has been fixed in 4.5.0 and later versions and Samba now stores the attribute correctly. The "samba-tool" utility has been enhanced to detect incorrectly stored "replPropertyMetaData" attributes:
# samba-tool dbcheck --cross-ncs
To fix the attributes, run:
# samba-tool dbcheck --cross-ncs --fix --yes ... CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com: 0x00000003 CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com: 0x00000000 ERROR: unsorted attributeID values in replPropertyMetaData on CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com Fix replPropertyMetaData on CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com by sorting the attribute list? [YES] Fixed attribute 'replPropertyMetaData' of 'CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com'
Note that the "--yes" parameter automatically fixes all problems found and not only the "replPropertyMetaData" attributes!
Run the check and fix operation on all Domain Controllers (DC), because "replPropertyMetaData" is a non-replicated attribute and modifications are not replicated to other DCs.
For more information, see the Samba AD DC database check section.
Default for LDAP Connections Requires Strong Authentication
Updating to 4.4.1 or later / 4.3.7 or later / 4.2.10 or later
The security updates 4.4.1, 4.3.7 and 4.2.10 introduced a new smb.conf option for the Active Directory (AD) LDAP server to enforce strong authentication. The default for this new option "ldap server require strong auth" is "yes" and allows only simple binds over TLS encrypted connections. In consequence, external applications that connect to AD using LDAP, cannot establish a connection if they do not use or support TLS encrypted connections.
Applications connecting to Samba AD using the LDAP protocol without encryption, are displaying error messages like:
ldap_bind: Strong(er) authentication required (8) additional info: BindSimple: Transport encryption required.
AD Database Cleanup of Deleted LDAP DNS Entries
Updating to 4.1.12 or later
Previously, Samba incorrectly created many deleted Active Directory (AD) objects for removed DNS entries. The problem has been fixed. If you start the first Domain Controller (DC) with a fixed Samba version, all deleted objects are removed. As a result, this can result in a slow performance until the deleted objects are removed.
Incorrect TLS File Permissions
Updating to 4.1.2 or later / 4.0.12 or later
Previously, Samba created the *.pem files used for LDAP TLS encryptions with insecure permissions. To avoid insecure connections, delete the files on all domain controllers (DC):
# rm /usr/local/samba/private/tls/*.pem
Restart Samba after you deleted the files to automatically re-create the new certificates.
Fixing dynamic DNS update problems
Updating to 4.0.7 or later
See Fix DNS dynamic updates in Samba versions prior 4.0.7 for details.
Fixing incorrect Sysvol and Directory ACLs
Updating from early 4.0.x versions, 4.0 beta and 4.0 release candidates
- To reset wrong Sysvol ACLs, run:
# samba-tool ntacl sysvolreset
- To reset all well known ACLs in the directory, run:
# samba-tool dbcheck --cross-ncs --reset-well-known-acls --fix
- To fix errors in the Active Directory (AD) database, run:
# samba-tool dbcheck --cross-ncs --fix
Samba Domain Members
No remarkable important changes.