Transferring and Seizing FSMO Roles: Difference between revisions

From SambaWiki
m (Mmuehlfeld moved page Transfering and Seizing FSMO Roles to Transferring and Seizing FSMO Roles without leaving a redirect: Fixed typo in title)
m (Added category)
Line 124: Line 124:


See https://support.microsoft.com/en-us/kb/324801
See https://support.microsoft.com/en-us/kb/324801





----
[[Category:Active Directory]]

Revision as of 21:46, 26 February 2017

Difference of Transferring and Seizing FSMO Roles

Whenever it's possible, you should transfer FSMO roles and do not seize them! Transferring is the recommended and cleaner way. But it requires that the DC, which currently owns the role you want to transfer, is still working and connected to the network. Transferring makes the old DC know that it does not own the role(s) any more.

If the DC is broken (e. g. hardware defect) and will never come back again, then you can seize the role on a remaining DC. It is very important that the old DC will never be connected to the network again, if it is connected again, this will cause conflicts and lead to an inconsistent AD. This is because the old DC will not notice the change and still feel responsible for tasks related to the role.



How to Handle Situations Where a DC with FSMO Roles Is Offline

There are three situations to distinguish:

1. The downtime is planned and the DC will come back soon (reboot, hardware replacement, etc.):

In this case, you have to decide, to temporarily transfer the roles to a different DC or be aware of the effects during the downtime. See The seven FSMO roles.

2. The DC should be demoted:

Transfer the roles to a different DC, before you demote.

3. The DC is offline because of a problem:

1. Don't panic!
2. Depending on the kind of role(s) that were on the DC, the consequences may be different. Make sure that you find out which roles are affected and what it means for your forest. See The seven FSMO roles.
3. Try repairing the broken DC and connect it to the network again. But never restore it from a backup, if at least one DC in the domain is still working. The replication could mix up your directory!
4. If there is no chance to get the DC back again, seize the roles on a remaining DC and demote the broken one.



FSMO Role Management Using samba-tool

Displaying the Current FSMO Role Owners

On a Domain Controller of your choice, run the following command, to print the owner of the different FSMO roles:

# samba-tool fsmo show
InfrastructureMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
RidAllocationMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
PdcEmulationMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
DomainNamingMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
SchemaMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com

Unfortunately before samba 4.3.0, samba-tool only shows five of the fsmo roles and that these five roles are owned by DC1 at the moment.

Before 4.3.0, to see all the fsmo roleowners, you will need to do something like this:

ldbsearch --cross-ncs -H /usr/local/samba/private/sam.ldb '(fsmoroleowner=*)' |\
 grep 'dn:' | sed 's|dn: ||'

This should produce a list of where the role owners are stored:

CN=Schema,CN=Configuration,DC=samdom,DC=example,DC=com
CN=Partitions,CN=Configuration,DC=samdom,DC=example,DC=com
CN=Infrastructure,DC=DomainDnsZones,DC=samdom,DC=example,DC=com
CN=Infrastructure,DC=ForestDnsZones,DC=samdom,DC=example,DC=com
DC=samdom,DC=example,DC=com
CN=RID Manager$,CN=System,DC=samdom,DC=example,DC=com
CN=Infrastructure,DC=samdom,DC=example,DC=com

To find out the fsmo role owner for a specific dn, you will need to do something like this:

ldbsearch --cross-ncs -H /var/lib/samba/private/sam.ldb -b "CN=Infrastructure,DC=DomainDnsZones,DC=samdom,DC=example,DC=com" \
-s base fsmoroleowner

Which should produce something similar to this:

# record 1
dn: CN=Infrastructure,DC=DomainDnsZones,DC=samdom,DC=example,DC=com
fSMORoleOwner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com

From Samba 4.3.0, running the 'samba-tool fsmo show' command will now show all 7 FSMO roles:

# samba-tool fsmo show
InfrastructureMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
RidAllocationMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
PdcEmulationMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
DomainNamingMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
SchemaMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
DomainDnsZonesMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
ForestDnsZonesMasterRole owner: CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com

Transferring an FSMO Role

  • Log on to the DC, that should be the new owner of the role you want to transfer.
  • Transfer the role to the DC, by executing the following command:
# samba-tool fsmo transfer --role=...
FSMO transfer of '...' role successful
  • Ensure that the role was transferred ('samba-tool fsmo show').

Note: samba-tool has a bug, that prevents a successful transfer of roles, even if „samba-tool fsmo show“ prints that the roles are transferred to the new host. See Bug #10734, to see if it is fixed in the version you're running.

Seizing a FSMO Role

  • Log on to the DC, that should be the new owner of the role you want to transfer.
  • Seize the role to the current DC, by executing the following command:
# samba-tool fsmo seize --role=...
Attempting transfer...
Transfer unsuccessful, seizing...
FSMO seize of '...' role successful
  • Ensure that the role was transferred ('samba-tool fsmo show').
  • Make sure, that the old DC is never connected to the network again!

Note: samba-tool has a bug, that prevents the seizure of the Domain Naming Master role. See Bug #10924. If you encounter this problem in your version, consider adding the „--force“ parameter, to workaround this issue.



Windows FSMO Role Management

See https://support.microsoft.com/en-us/kb/324801