Testing the DNS Name Resolution: Difference between revisions

From SambaWiki
(Moving the Testing DNS part from the DNS_Administration HowTo to a separate page.)
 
m (/* minor edit)
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
<noinclude>
On Windows and *nix, you can use „nslookup“ to test if your computer can resolve records by using your DNS. Try resolving the name of your Domain Controller into its IP:
= Introduction =
</noinclude>

To verify that your DNS settings are correct and your client or server is able to resolve IP addresses and host names use the <code>nslookup</code> command. The command is available on Linux and Windows.





== Forward Lookup ==

To resolve a host name its IP address:


# nslookup DC1.samdom.example.com
# nslookup DC1.samdom.example.com
Server: 192.168.1.1
Server: 10.99.0.1
Address: 192.168.1.1#53
Address: 10.99.0.1#53
Name: DC1.samdom.example.com
Name: DC1.samdom.example.com
Address: 192.168.1.1
Address: 10.99.0.1


Nslookup will show you, which server was asked (192.168.1.1) and the result of your query (DC1.samdom.example.com has IP 192.168.1.1)



To query a SVR record, you have to start nslookup and set the type to „SRV“, to retrieve the values (works on Windows and *nix):


== Reverse Lookup ==

To resolve a IP address to its host name:

# nslookup 10.99.0.1
Server: 10.99.0.1
Address: 10.99.0.1#53
1.0.99.10.in-addr.arpa name = DC1.samdom.example.com.

Note that in a Samba AD, the reverse zone is not automatically configured. To set up a reverse zone, see [[DNS_Administration|DNS Administration]].





== Resolving SRV Records ==

Active Directory (AD) uses SRV records to locate services, such as Kerberos and LDAP. To verify that SRV records are resolved correctly, use the <code>nslookup</code> interactive shell:


# nslookup
# nslookup
Default Server: UnKnown
Default Server: 10.99.0.1
Address: 192.168.1.1
Address: 10.99.0.1
> set type=SRV
> set type=SRV
> _ldap._tcp.samdom.example.com.
> _ldap._tcp.samdom.example.com.
Server: UnKnown
Server: UnKnown
Address: 192.168.1.1
Address: 10.99.0.1
_ldap._tcp.samdom.example.com SRV service location:
_ldap._tcp.samdom.example.com SRV service location:
Line 27: Line 59:
svr hostname = dc1.samdom.example.com
svr hostname = dc1.samdom.example.com
samdom.example.com nameserver = dc1.samdom.example.com
samdom.example.com nameserver = dc1.samdom.example.com
dc1.samdom.example.com internet address = 192.168.1.1
dc1.samdom.example.com internet address = 10.99.0.1



If your query can't be answered, because it doesn't exist, you'll receive



== Error Messages ==

* The DNS server is not able to resolve the host name:


** server can't find DC1.samdom.example.com: NXDOMAIN
** server can't find DC1.samdom.example.com: NXDOMAIN


* The DNS server is not able to resolve the IP address:
If you query a none existing DNS server, it would result in

** server can't find 1.0.99.10.in-addr.arpa: NXDOMAIN

* The DNS server used is not available:


;; connection timed out; no servers could be reached
;; connection timed out; no servers could be reached

Revision as of 10:47, 28 November 2018

Introduction

To verify that your DNS settings are correct and your client or server is able to resolve IP addresses and host names use the nslookup command. The command is available on Linux and Windows.



Forward Lookup

To resolve a host name its IP address:

# nslookup DC1.samdom.example.com
Server:         10.99.0.1
Address:        10.99.0.1#53

Name:   DC1.samdom.example.com
Address: 10.99.0.1



Reverse Lookup

To resolve a IP address to its host name:

# nslookup 10.99.0.1
Server:        10.99.0.1
Address:	10.99.0.1#53

1.0.99.10.in-addr.arpa	name = DC1.samdom.example.com.

Note that in a Samba AD, the reverse zone is not automatically configured. To set up a reverse zone, see DNS Administration.



Resolving SRV Records

Active Directory (AD) uses SRV records to locate services, such as Kerberos and LDAP. To verify that SRV records are resolved correctly, use the nslookup interactive shell:

# nslookup
Default Server:  10.99.0.1
Address:  10.99.0.1

> set type=SRV
> _ldap._tcp.samdom.example.com.
Server:  UnKnown
Address:  10.99.0.1

_ldap._tcp.samdom.example.com   SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc1.samdom.example.com
samdom.example.com      nameserver = dc1.samdom.example.com
dc1.samdom.example.com  internet address = 10.99.0.1 



Error Messages

  • The DNS server is not able to resolve the host name:
** server can't find DC1.samdom.example.com: NXDOMAIN
  • The DNS server is not able to resolve the IP address:
** server can't find 1.0.99.10.in-addr.arpa: NXDOMAIN
  • The DNS server used is not available:
;; connection timed out; no servers could be reached