Setting up a BIND DNS Server: Difference between revisions

From SambaWiki
m (/* Try to clarify things)
m (/* added note about '--with-dlopen' now being builtin.)
Line 25: Line 25:


Make sure that your package provider compiled BIND using the following options:
Make sure that your package provider compiled BIND using the following options:
* <code>--with-gssapi=yes</code> for secure dynamic DNS updates using Kerberos
* <code>--with-gssapi=yes</code> or <code>--with-gssapi=/usr</code> (or similar) for secure dynamic DNS updates using Kerberos
* <code>--with-dlopen</code> dynamically loadable zones (DLZ)
* <code>--with-dlopen</code> dynamically loadable zones (DLZ)

{{Imbox
| type = note
| text = Later versions of Bind9.9.x have the <code>--with-dlopen</code> option builtin and is not shown by the following command. This happened around Bind 9.9.4
}}


To list the build options:
To list the build options:

Revision as of 18:26, 2 January 2018

Introduction

If you are planning to set up a Samba Active Directory (AD) domain controller (DC) using the BIND9_DLZ back end, you have to install and configure the BIND DNS server first.

The following describes how to set up a basic BIND installation you can use as Samba AD DC back end.



Installing BIND

For a list of supported BIND versions, see Configuring the BIND9_DLZ module.


Package Installation

Installing BIND using packages provided with your distribution is the recommended way. Select this installation mode for an easy installation and to automatically receive updates when available. For details how to install packages, see the distribution's package manager documentation.

Make sure that your package provider compiled BIND using the following options:

  • --with-gssapi=yes or --with-gssapi=/usr (or similar) for secure dynamic DNS updates using Kerberos
  • --with-dlopen dynamically loadable zones (DLZ)

To list the build options:

# named -V
BIND 9.x.y built with ... '--with-dlopen=yes' '--with-gssapi=yes' ...



Compiling and Installing BIND

Use this installation mode if you are an advanced user and know how to compile software.


Downloading the Sources

Download a supported BIND version from https://www.isc.org/software/bind.


Compiling BIND

  • Pass at least the following parameters to the configure command:
# ./configure --with-gssapi=/usr/include/gssapi --with-dlopen=yes
Add further parameters, if required.
  • To build and install, run:
# make
# make install


Adding a User and Group for BIND

For security reasons, do not run BIND as root user.

To create a named group using GID 25:

# groupadd -g 25 named

To create a named account with UID 25, primary group named, home directory /var/named/, and without a valid shell:

# useradd -u 25 -g named -d /var/named -M -s /sbin/nologin named

For details, see the useradd (8) and groupadd (8) man page.



Configuring BIND

Setting up a named.conf file

To locate the directory, BIND uses to read the named.conf file:

# named -V
BIND 9.x.y built with ... '--sysconfdir=/etc' ...

In the previous example, BIND reads the configuration from the /etc/named.conf file.

The following is a basic configuration file:

# Global Configuration Options
options {

    auth-nxdomain yes;
    directory "/var/named";
    notify no;
    empty-zones-enable no;

    # IP addresses and network ranges allowed to query the DNS server:
    allow-query {
        127.0.0.1;
        10.99.1.0/24;
    };

    # IP addresses and network ranges allowed to run recursive queries:
    # (Zones not served by this DNS server)
    allow-recursion {
        127.0.0.1;
        10.1.1.0/24;
    };

    # Forward queries that can not be answered from own zones
    # to these DNS servers:
    forwarders {
        8.8.8.8;
        8.8.4.4;
    };

    # Disable zone transfers 
    allow-transfer {
        none;
    };
 };

# Root Servers
# (Required for recursive DNS queries)
zone "." {
   type hint;
   file "named.root";
};

# localhost zone
zone "localhost" {
    type master;
    file "master/localhost.zone";
};

# 127.0.0. zone.
zone "0.0.127.in-addr.arpa" {
    type master;
    file "master/0.0.127.zone";
};

For details about the used parameters and options, see the named.conf (5) man page.

The previous example does not contain the BIND9_DLZ configuration required for setting up a Samba AD DNS server. For details how to set up the module, see BIND9_DLZ DNS Back End.


Downloading the DNS Root Servers List

  • Download the latest list of the DNS root servers to the /var/named/named.root file:
# wget -q -O /var/named/named.root http://www.internic.net/zones/named.root
  • Enable the BIND user to read the root servers list:
# chown root:named /var/named/named.root
# chmod 640 /var/named/named.root


Creating the localhost Zone File

  • Create the localhost forward zone in the /var/named/master/localhost.zone file:
$TTL 3D

$ORIGIN localhost.

@       1D      IN     SOA     @       root (
                       2013050101      ; serial
                       8H              ; refresh
                       2H              ; retry
                       4W              ; expiry
                       1D              ; minimum
                       )

@       IN      NS      @
        IN      A       127.0.0.1
  • Enable the BIND user to read the zone file:
# chown named:named /var/named/master/localhost.zone
# chmod 640 /var/named/master/localhost.zone


Creating the 0.0.127.in-addr.arpa Zone File

  • Create the 0.0.127.in-addr.arpa reverse zone in the /var/named/master/0.0.127.zone file:
$TTL 3D

@       IN      SOA     localhost. root.localhost. (
                        2013050101      ; Serial
                        8H              ; Refresh
                        2H              ; Retry
                        4W              ; Expire
                        1D              ; Minimum TTL
                        )

       IN      NS      localhost.

1      IN      PTR     localhost.


  • Enable the BIND user to read the zone file:
# chown named:named /var/named/master/0.0.127.zone
# chmod 640 /var/named/master/0.0.127.zone



Starting the Daemon

To start the BIND daemon as the named user, run

# named -u named

Alternatively, use your operating system tools, such as systemctl or service, to start the daemon. See you distribution's documentation for details.



Testing Your Zones

The following examples query the DNS service on the local machine (127.0.0.1):

To test the localhost forward zone:

# host -t A localhost 127.0.0.1
Using domain server:
Name: 127.0.0.1
Address: 127.0.0.1#53
Aliases: 
localhost has address 127.0.0.1

To test the 0.0.127.in-addr.arpa reverse zone:

# host -t PTR 127.0.0.1 127.0.0.1
Using domain server:
Name: 127.0.0.1
Address: 127.0.0.1#53
Aliases: 
1.0.0.127.in-addr.arpa domain name pointer localhost.



Configuring the BIND9_DLZ module

For details, see See BIND9_DLZ DNS Back End.