Difference between revisions of "Setting up Samba as a Print Server"

From SambaWiki
Jump to: navigation, search
m (Fix note on x64 drivers)
m (Fix indentation)
Line 65: Line 65:
  # Forwarding the jobs to a Windows print server.
  # Forwarding the jobs to a Windows print server.
# Hint: Vista and higher, don't allow anonymous connects by default, so you must provide a username and password.
# Hint: Vista and higher, don't allow anonymous connects by default, so you must provide a username and password.

Revision as of 13:39, 6 January 2014



This HowTo will provide you an easy guide to setup Samba to act as a Windows print server including Point'n'Click printer driver installation for users.

This HowTo is valid for Samba 3 and 4 print server installations.

Some definitions

Printer share 
Each printer is shared by a name. During the printing process, the client sends the printjob to it.
Print server backend 
Samba can use e. g. CUPS, LPD/Lprng and other as backend. The print server forwards the job to local or network printers.
Windows printer driver 
A piece of software, that converts the printed data to a printer specific form. The driver for each shared printer can be preconfigured with default values.
Windows 2000 and later support the abillity to automatically download and install drivers from the server including preconfiguring, when connecting a printer. The installation can be done by ordinary users, without special permissions.
Printer forms 
Windows is already shipped with an amount of forms, that define the typical paper sizes. If a formular isn't known to the print server, the client could not use this, altought the printer is able to do it.

Driver models

Supported by Samba: Printer driver version 3 (Windows 2000 to Windows 8)

Currently not supported by Samba: Printer driver version 4 (Windows 8)

Print server backend

The following sub-chapters will give you a short overview on possible backends, including adding a new network printer, we'll use in our later examples for sharing it by Samba.

The examples setup a RAW printer (content is send directly to the device). We don't use filters or drivers on the backend, because a RAW printer allows us to render the output on the workstation and use the printer specific driver.

We assume here, that you have the print server backend already basically configured and it's running, so printers can be added next.


CUPS is currently the most widely used spool system in *nix environments and shipped with most distributions. Samba has built-in support and defaults to CUPS if the development package (aka header files and libraries) could be found at compile time.

Basically all sorts of files can be printed with CUPS, but using a Postscript or a RAW printer driver will give you the most benefit in combination with the Windows printer driver, because then all settings can be controlled on the Windows client.

Adding a new printer

  • On the „Administration“ tab click the „Add Printer“ button.
  • Choose the way, how your printer is connected and enter the appropriate URL. Examples:
# LPD protocol

# Internet Printing Protocol

# Forwarding the jobs to a Windows print server.
# Hint: Vista and higher, don't allow anonymous connects by default, so you must provide a username and password.
  • Enter a name for the printer
  • When you reached the step, where to choose the vendor and model, choose „Raw“ for both, because the rendering is already done later by the Windows driver.
  • Save the new added printer.


This was the first widely used printing system and still runs on many servers. It is very simple to install and configure. There are different implementations of LPD servers, like the often used LPRng.

Adding a new printer

  • To add a new network printer, you simply need to add the following line to your 'printcap' (typically '/etc/printcap'). For the different options used in the example, see 'man printcap'.
  • After adding the new printer entry, run the following command to create the LPD spool directory and restart/reload the service, to take the changes affect.
# checkpc -f
# service lpd restart
  • The following command allows you query the state of the printer:
 Queue: no printable jobs in queue

no entries

Configuring Samba as print server


Granting print operator privileges

Users or groups, who should be able to administrate printers on your server, have to be granted the „SePrintOperatorPrivilege“ privilege. It is recommended, to grant it to a domain group, because changes can be done quick and easily with the typical user management tools like ADUC.

The following example grants the privilege to the domain group „Domain Admins“:

# net rpc rights grant 'SAMDOM\Domain Admins' SePrintOperatorPrivilege -Uadministrator

Existing privileges you can reviewed by

# net rpc rights list accounts -Uadministrator

Setup the [printers] share

This share defines general information about your printing backend. See the „[printers]“ section in the man page for additional information.

  • Add the new section to your smb.conf
     path = /var/spool/samba
     printable = yes
     printing = CUPS|LPRNG|...
  • If you choose CUPS as backend, make sure, that your smbd is compiled with CUPS support:
# smbd -b | grep CUPS

If you don't get any output, make sure, that the CUPS header files and libraries are installed and recompile Samba with --with-cups.

  • The next step is to create the samba spool directory, defined in the „[printer]“ share. Set the appropriate permissions, depending to your needs.
# mkdir -p /var/spool/samba/
# chmod 1777 /var/spool/samba/

Setup the [print$] share

To enable Point'n'Print support, a share named „print$“ must exist. This share name is hardcoded in Windows clients and can't be choosen.

  • Add the share to your smb.conf
     path = /srv/samba/Printer_drivers
     comment = Printer Drivers
     writeable = yes
  • Create the folder, that will contain the drivers later:
# mkdir -p /srv/samba/Printer_drivers
  • For special permissions on the share, set them on the folder on *nix side (Samba 3) or through windows (Samba 4).
  • Next we create the required directory structure for the print$ share (newer versions of Samba can create it on the fly when uploading):
for i in COLOR IA64 W32ALPHA W32MIPS W32PPC W32X86/{2,3} WIN40 x64; do 
     mkdir -p $BASEDIR/$i;
  • At last, set the appropriate permissions, depending to your needs. Example:
# chmod -R 755 /srv/samba/Printer_drivers
If you're running Samba 4.x have a look at the Change permissions on a folder of a share HowTo, for chaning permissions.

Sharing a printer with Samba

  • For each printer you want to share via Samba, you have to create a separate share (unless you have "load printers = yes" defined in your smb.conf). The following is an example:
     path = /var/spool/samba/
     browseable = yes
     printable = yes
     printer name = Printername_in_backend
  • Set the „printer name“ parameter to the name of your corresponding CUPS/LPD/... queue.
  • To bring the changes live, reload the Samba configuration:
# smbcontrol all reload-config

Uploading printer drivers for Point'n'Print driver installation

If you have already uploaded the driver for your printer in the past, you can skip this section.

If you have to provide a printer driver for x86 and x64 plattforms, you have to upload them from a x64 machine. A x86 client can only upload x86 drivers, while a x64 client can do both.

It's important, that if you want to provide printing support for multiple plattforms on one printer, that you upload drivers for both, that have exactly the same driver name! Otherwise, the driver for the different plattforms can't be associated.

The following steps are done on Windows7 64-Bit, to allow uploading x86 and x64 bit drivers, which should work for Windows 2000 to Windows 8.

  • Go to \\YourPrintserver and click the „View remote printers“ button
Server Share List.png
  • You will see a list of all printers you have shared.
File:View remote printers.png
  • Right-click somewhere in the empty part of the window and choose „Server Properties...“ from the appearing context menu.
  • Next go to the „Drivers“ tab and click the „Add...“ button. The „Add Printer wizzard will appear.
  • Select the driver architecture you want to upload (upload one by one) and click „Next“.
  • Click the „Have Disk...“ button and browse to the directory containing the driver you want to upload.
  • The wizzard will show you a list of all drivers, the directory you pointed to, contains. Select the appropriate driver for your printer and click „Next“.
File:Printer driver selection.png
  • In the end, the wizzard will copy all required files to the print$ share of your print server.
  • If you want to upload drivers for a different plattform or other devices, repeat the steps.

Associating a shared printer with a driver and preconfiguring

  • Go to \\YourPrintserver and click the „View remote printers“ button.
Server Share List.png
  • You will see a list of all printers you have shared.
File:View remote printers.png
  • You could do the association of the driver with the printer share on Windows or on *nix side:
  • On Windows:
  • Right-click to the shared printer, you would associate a driver with and choose „Properties“.
  • If there's no driver associated with an printer yet, you'll been asked if you want to install the driver now. Answer this question with „No“!
File:Question install driver.png
  • A default printer properties window will appear. Go to the „Advanved“ tab and choose the already uploaded driver from the list, that is suitable for the printer.
File:Choose driver.png
Windows clients only permit driver association when an uploaded driver matches the architecture reported by the spoolss server. Samba reports "Windows NT x86" by default, but can be changed to "Windows x64" via the undocumented spoolss: architecture = Windows x64 smb.conf option. As a workaround you can assign the driver with rpcclient (see an example below) or additionaly upload a x86 version of the driver, too.

  • Close the windows with „OK“ to associate the driver with the printer.
  • If you do this step on Vista or higher, Windows will ask you, if you trust the server (This can' be suppressed by a GPO. See Setting up a GPO for trusting printer drivers). Choose „Install driver“, if you are seeing this window.
File:Question trust printer.png
  • After associating the driver, Windows renames the printer to the driver name. You can leave that or rename it again. For more clearness, it's better to set the name on Windows side to the one you used in your smb.conf.
  • On *nix:
  • Retrieve a list of all drivers, that are on the print$ share
    # rpcclient localhost -U administrator -c 'enumdrivers'
  • Associate the driver with the printer (The driver name, must be exactly the same, like in the output of the above „enumdrivers“ output):
    # rpcclient localhost -U administrator -c 'setdriver "MyDemoPrinter" "HP Universal Printing PS"'
  • You can review the associations with
    # rpcclient localhost -U administrator -c 'enumprinters'
  • On Windows, now right-click and choose „Properties“ again, to preconfigure the printer.
  • First you should take a look on the tabs on the properties windows. Typically there's a tab called „Device Settings“, „Settings“, „Configuration“ or something like that (depending on the driver). This usually allows you to configure the main printer settings (number of trays, duplex on/off, etc.). Set the values fitting to your device and click the „Apply“ button.
File:Device Settings.png
  • On the „Sharing“ tab, you can check „List in the directory“, to publish the printer in your Active Directory, what makes it easier for users to find.
  • To preconfigure the printers default settings, go to the „Advanced“ tab and click the „Printing defaults...“ button. A new window will appear. It's layout and possibilities differ and depent on the driver. Here you can set the default values, the user will receive, when connecting the printer.
File:Printing defaults.png
  • If you have finished configuring your printer, save all changes with „OK“.

If you had uploaded drivers for multiple architectures to that printer, the settings will be retrieved connecting on the different plattforms - regardless on which they have been set. But as mentioned earlier, this requires, that all drivers for each plattform have the same name (versions can differ).

Now it's time to connect to the printer and print a test page.

Setting up a GPO for trusting printer drivers

To keep the following guide simple, we setup the policy in the „Default Domain Policy“. If you have different requirements, adapt it to your needs.

  • Open the Group Policy Management console.
  • Go to „Forest: your.domain“ / „Domains“ / „your.domain“
  • Right-click „Default Domain Policy“ and choose „Edit“ to open the Group Policy Management Editor.
File:Edit group policy.png
  • Navigate to „Computer Configuration“ / „Policies“ / „Administrative Templates“ / „Printers“ and double-click to the „Point and Print Restrictions“ Policy (if you want to setup the policy on a per-user base instead of machine-base, go to the same path, but just in the „User Configuration“ branch).
  • Enable the policy and set „When installing driver for a new connection“ and „When updating drivers for an existing connection“ each to „Do not show warning or elevation prompt“. You can restrict the policy in that window to prevent the warning just for defined hosts, too, if required..
File:Point and print restrictions.png
  • Save the changed policy by clicking „OK“ and closing the windows.

After the clients have refreshed their policies (per default every 90 minutes, with a random offset of 0 to 30 minutes), the warning won't be shown up any more. The policy refresh can be forced by

> gpupdate /force /target:computer

Enabling new paper sizes (Forms)

Only standard sizes of formulars are included by default. If you require other forms, you have to add them.

  • Go to \\YourPrintserver and click the „View remote printers“ button
Server Share List.png
  • You will see a list of all printers you have shared.
File:View remote printers.png
  • Right-click somewhere in the empty part of the window and choose „Server Properties...“ from the appearing context menu. The print server forms tab appears.
  • Check „Create a new form“, and fill the values. In the end click „Save Form“, to save your changes.
File:Create new form.png

The new added paper sizes will be selectable from all printer dialogs now.