SMB Traffic Analyzer (SMBTA)
What is SMB Traffic Analyzer
SMB Traffic Analyzer (from now on called SMBTA) is a software suite utilizing the Samba CIFS server to create statistics about the data traffic on a Samba network. SMBTA is made out of several components:
- a module in the VFS (Virtual File System) Layer of Samba
- a system daemon program
- user oriented programs to visualize the statistics
SMBTA is utilizing a SQL storage to store data about the traffic caused on a network. By making this data available via SQL, SMBTA is helpful for many system administrators.
SMBTA also has real-time interfaces, making it possible to watch Samba traffic in real time on the console or interfacing with rrdtool to create a round robin database.
Having knowledge of SQL is not required. The user may also run the client programs to query the database. These are specialized to the organization of the database, and are taking away much of the work to translate often needed questions into SQL statements from the user. They are also running networked, and can be run on a complete different system where the SQL storage exists.
The basic idea and main concept of SMBTA was born on the SambaXP conference in Göttingen, Germany, in 2007. At the SNIA conference 2008, I was able to present a prototype of the idea to the Samba team. The code for the module got immediately accepted and was introduced with Samba 3.2.0 to Samba users.
This document is refering to the version 2.0 of the SMB Traffic Analyzer VFS module.
Please check SMB Traffic Analyzer’s home page for newer versions of the software or this document.
Why using SMB Traffic Analyzer
Samba services may run on special hardware, like RAID systems, or other specialized storage. With SMBTA, the user can create an overview of the network usage on the network. SMBTA can be used to answer questions like this:
- Which of my services is the most used one?
- At which time the usage of my service reaches peaks?
- Which service almost never gets used?
- Which users are the highest traffic generators?
- What where the detailed last file activities on a share?
- Which is the top used file by read and write access?
Isn’t SMBTA a tool to control employees?
Yes it can be used like that, but doesn’t need to be. To expose user names to a storage is even forbidden in many countries. Therefore, SMBTA allows for anonymization of any data linked to a person. There are many use cases for SMBTA, like determining and planning hardware for your services, or analyzing the network before switching to clustered Samba.
The basic concept of SMBTA
The Samba CIFS server features a Virtual File System Layer (VFS), that allows modules to be linked into the layer, replacing or enhancing the functions of the VFS. Modules can be linked into and behave completely transparent. SMBTA makes use of this functionality by adding a module to Samba’s VFS. In the VFS layer, the module is collecting data from prominent VFS functions like write, read, close etc.
The collected data may be be encrypted, and send over the network to a receiver program. This daemon program, smbtad, is then building a SQL storage from the data. Besides of the generated SQL storage, client programs can be used to query the storage in a specialized way over the network.
Where to get SMBTA
The SMBTA VFS module is called vfs_smb_traffic_analyzer.so, and is packaged with Samba version greater or equal than 3.2.0.
The other parts of SMBTA, the daemon program smbtad, as well as the client programs webSMBTA, smbtaquery and smbtamonitor are available in source code from the projects homepage at http://holger123.wordpress.com/smb-traffic-analyzer/.
Building SMBTA from the sources
The SMBTA tools smbtaquery and smbtamonitor are utilizing "cmake" as the primary build tool. The smbtad daemon program does too.
Before trying to build smbtad and smbtatools, check for the following requirements:
- cmake ( required for both )
- libsmbclient library ( required for smbtautils )
- curses/ncurses library ( required for smbtautils )
- libDBI ( required for both )
With cmake, you usually do an "out-of-source" build. That means that the source will not be build in the original source directory. Here is an example build. Suppose you’ve unpacked the smbtatools source tarball at (the same procedure can be followed to compile smbtad):
You can now create your own directory where you want to build smbtatools. Like:
mkdir /home/tom/smbtatools-build cd /home/tom/smbtatools-build
If you have any libraries or required components in other directories than the system paths, you should specify those by specifying environment variables before the cmake run:
setenv CMAKE_INCLUDE_PATH $YOUR_PATH_TO_EXTERNAL_INCLUDES:$ANOTHER_DIRECTORY_WITH_EXTERNAL_INCLUDES setenv CMAKE_LIBRARY_PATH $YOUR_PATH_TO_LIBRARIES:$ANOTHER_DIRECTORY_WITH_LIBRARIES
Both smbtatools and smbtad require sqlite to run. If it isn’t installed on your system, or isn’t available in a version new enough, both packages will build an included sqlite variant and link to this.
You are now in the build directory. Just run cmake from here:
If you want the later "make install" to install control files for SMBTA into /etc/init.d, set this cmake cache value:
cmake -D CMAKE_INSTALL_RCFILE:string=yes ../smbtad/
And cmake will check the requirements of smbtatools/smbtad against your system. If it complains, it will return human readable messages about what is missing. After a successful cmake run, you can just do "make" and "make install" as "usual" in this directory.
After a succesful run of cmake, you can run "make" and "make install" ( and "make install" might require root privileges) as usual:
make make install
If you want to install the package to a different prefix, you use:
make DESTDIR=/$YOUR/$DESTINATION install
Setting up SMBTA
Upgrading from a former version
SMBTA provides an update path to convert databases used with former versions to the current one.
The smbtaquery program includes a command line option "-C --convert":
smbtaquery -M $DB-DRIVER -N $DATABASE-NAME -S $DATABASE-USER -H $DATABASE-HOST -C
This process is self explaining. Basically it presents a menu to choose the version of SMBTA you are coming from. Please consult the chapter about the smbtaquery program to read more about the arguments to the -M, -N, -S and -H options.
About the database
To run SMBTA, you’ll need to setup a database. Current valid databases are:
- Postgresql, tested succesfully by the SMBTA development team.
- sqlite3, tested by the SMBTA development team.
- MySQL, untested by the SMBTA development team, but supported by libDBI. Feedback is highly welcome!
Furthermore, SMBTA will need the following information to access the database:
- A name of a user that has access to the database
- The users password
- The hostname or IP adress of the system that is running the database
- The name of the database to access.
Initial setup of the database
If you are installing SMBTA for the first time, SMBTA assumes that the administrator has setup an empty database, with a user that has access to it. The smbtad component can then prepare an empty database on an initial run by using "smbtad -T", creating all required tables. See the chapter on smbtad for more about this.
Activating the VFS module on Samba Servers
In general, the Samba CIFS server is configured via smb.conf, it’s main configuration file. A typical service definition would look like this:
[ExampleShare] path = /space read only = no
Defining the share "ExampleShare" as a CIFS service, refering to the path /space on the servers storage.
By extending the share definition with the commands to load the SMBTA VFS module, SMBTA logging for this service can be activated:
[ExampleShare] path = /space read only = no vfs objects = smb_traffic_analyzer smb_traffic_analyzer:protocol_version = V2 smb_traffic_analyzer:host = localhost smb_traffic_analyzer:port = 3490
The host and port parameters define the hostname of the system that will be used as the target for the VFS modules data to send. It will try to connect to the port number given with the parameter port.
Unix domain socket
The module can also run using a unix domain socket, which is useful if you want to connect smbtad on the same system as the Samba server. In this case The share definition would look like this:
[ExampleShare] path = /space read only = no vfs objects = smb_traffic_analyzer smb_traffic_analyzer:protocol_version = V2 smb_traffic_analyzer:mode = unix_domain_socket
The mode parameter set to "unix_domain_socket" then will use a unix domain socket at /var/tmp/stadsocket.
Anonymization of user related information can be enabled in the VFS module. There are two modes of anonymization possible.
The first method is created by generating a hash number out of the username, and add the number to a given prefix in the configuration. Such, a user called "holger" might become "user123", if "user" was the given prefix.
[ExampleShare] path = /space read only = no vfs_objects = smb_traffic_analyzer smb_traffic_analyzer:protocol_version = V2 smb_traffic_analyzer:mode = unix_domain_socket # enable prefix based anonymization smb_traffic_analyzer:anonymize_prefix = user
The second method is totally anonymizing any users. It just replaces the username (and the SID) to a given prefix.
[ExampleShare] path = /space read only = no vfs_objects = smb_traffic_analyzer smb_traffic_analyzer:protocol_version = V2 smb_traffic_analyzer:mode = unix_domain_socket # enable total anonymization mapped to "user" smb_traffic_analyzer:anonymize_prefix = user smb_traffic_analyzer:total_anonymization = yes
Setting up smbtad
On the target host of the module, the program smbtad is running. It’s task is mainly to feed a SQL storage out of the data it receives from the module, maintain the storage and accept requests from clients.
smbtad -i 3490 -p 3491
smbtad is a daemon program that can be run by any user. By default, it creates a directory '$HOME/.smbtad/' where it stores it’s database. The above call makes smbtad to listen to the VFS modules connections on port 3490, and listen to client connections on port 3491.
By default, smbtad creates a database as '$HOME/.smbtad/staddb'. If the database already exists, it will use the existing database.
The command line options of smbtad
Any option you give that smbtad doesn’t understand will lead to print out it’s list of processed commands. Such as if the user calls:
The following output will appear:
SMB Traffic Analyzer daemon version 1.2.5 License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> (C) 2008-2011 Holger Hetterich <email@example.com> -S --dbuser Specifiy the user for the database. -H --dbhost Specifiy the host of the database. -P --dbpassword Specifiy to password to access the db. -M --dbdriver Specify the libDBI driver to use. -N --dbname Specify the name of the database. -i --inet-port Specifiy the port to be used. Default: 3490. -u --unix-domain-socket If this parameter is specified, a unix domain socket at /var/tmp/stadsocket will be used. -d --debug-level Specify the debug level (0-10). Default: 0. -q --query-port Port to be used for clients. -o --interactive Don't run as daemon. (Runs as daemon by default) -c --config-file Use configuration file given. -t --maintenance-timer <value> specify the time intervall to to start the database maintenance routine. Format is HH:MM:SS Example: -m 00:30:00 will run the maintenance routine every half hour. Default: 01:00:00 -m --maintenance-timer-config <value> specify a number of days and a time. Every database entry which is older than the the specified number of days will be deleted by the maintenance routine. Format is: DAYS, HH:MM:SS Default: 1,00:00:00 -k --keyfile Keyfile for encryption to be used between module and smbtad. -p --precision Precision value for the build-in cache. Default is 5. -U --use-db Specify 0 or 1 as argument. If this is 0, no database handling will be done. Default is 1. -T --setup Do the initial database setup and exit.
- -i --inet-port: Specifiy the internet socket port, that smbtad is using to listen for data from the VFS module. If the port number is not given, the Default setting 3490 will be used.
- -d --debug-level: Specify the debug level when running smbtad. If you get smbtad crashing and want to produce a bug report, please run it with -d 10, which is the highest debug level. The default value for this setting is 0, only fatal errors will be reported in this case. The debug messages smbtad is producing will be consumed by syslog and thus appear in your system log.
- -o --interactive: For debugging reasons, it can be useful to not run smbtad as a daemon program. When run with -o, smbtad will not become a daemon program. The default is to run in daemon mode.
- -c --config-file: The user can provide a configuration file instead of providing the command line switches.
- -q --query-port: This is the internet socket port to which clients can connect when those want to request real time information. In case this parameter is not given, it is set to 3491 (or in other words to the value of --i --inet-port + 1.
- -t --maintenance-timer: To hinder the database from growing infinite, a maintenance process is included in smbtad, which will clean up the database after a certain rule (see -m --maintenance-timer-config). The -t option specifies the interval in hours, as to when the maintenance process should be run. For example, if you give 00:10:00, a maintenance process will be started every ten minutes.
- -m --maintenance-timer-config: Here you can specify how the maintenance process should work. The format is DAYS, HH:MM:SS. For example, if you want to delete anything in the database that is older than one day, you would give 1,00:00:00 (which is the default). Would you like to delete anything in the database that is older than 2 weeks, then you would give: 14,00:00:00 as parameter. Having deleted everything that is older than 2 hours, would be 0,02:00:00 as parameter.
- -u --unix-domain-socket: If this option is given, a unix domain socket under /var/tmp/stadsocket will be used for the connection to the VFS module. This is useful if smbtad is to be run on the same machine that runs the Samba server.
- -n --unix-domain-socket-cl: If this option is given, a unix domain socket under /var/tmp/stadsocket_client will be used for the connection to clients such as smbtaquery. This is useful if smbtad is to be run on the same machine that runs the tools.
New options since 1.2.3:
- -p --precision: As of version 1.2.3 of smbtad, the program will sum up similar VFS R/W entries in it’s cache and only store the sum of transferred bytes instead of every single VFS entry. It’s cache is insert-sort based and the summing up makes the resulting database much smaller than in former releases. Because of this interpolation, statistic results will get slightly unprecise. The -p/--precision argument allows the user to control the timespan in seconds, over which the cache is summing up similar VFS R/W entries. The default is set to 5 seconds. The more seconds the user is specifying, the smaller will the resulting database be, and the less precise will the results be, when queried through smbtaquery. To do real data-mining, this argument can be set to 0. In this mode, smbtad isn’t summing up any VFS entry, and stores them as is in the database. This is the behaviour of smtbad in former releases than 1.2.3.
- -U --use_db: As of version 1.2.3 of smbtad, the database usage of smbtad can be completely shut down. This is useful when SMBTA is only to be used with rrddriver or smbtamonitor, which only rely on real time data. The option requires an integer argument that is either 0 or 1. If it is 1, which is the default, the database will be handled, if it’s 0, only real time data is supported. Please note, that under --use-db=0 circumstances, some monitor functionality such as the TOTAL monitor, which is supposed to transfer the TOTAL sum of transfered bytes of an object will have a different behaviour. As the database is not available, it cannot query for the initial sum and starts with 0. Also, the real time tools rrddriver and smbtamonitor are doing an identification procedure by default, which must be shut down by using the --I/--identify switch with the tools. If you want to use SMBTA for rrddriver or smbtamonitor only, it is recommended to set this option to 0.
New options for database-settings with libDBI since 1.2.4:
- -S --dbuser: Specifies the user of the database, and must be a valid user of the database.
- -H --dbhost: Specifies the host name of the system where the database runs.
- -P --dbpassword: Specifies the password of the user (given with -S --dbuser to access the database.
- -M --dbdriver: Specifies the driver to use for the database connection.
- Database drivers are:
- "pgsql" for Postgresql.
- "mysql" for MySQL (untested).
- "sqlite3" for Sqlite3 (untested).
- Database drivers are:
- -N --dbname: Specifies the name of the database to be used for the database connection.
- -T --setup: As of version 1.2.4 of smbtad, the database needs to be setup by the -T --setup switch. This will access the database, and create the initial tables and structure of the database. smbtad will not daemonize after this call, just return normally.
- -I --ip: This command line switch specifies the interface or network address to bind smbtad to when in network operation. It can either be a IPv4 address, a IPv6 address, or a fully qualified hostname which will be resolved by smbtad. If this option is not given, it’ll default to "localhost".
Using a configuration file with smbtad
All the options mentioned in the paragraph before can be configured with a configuration file. The configuration file has the same format as ini-Files, known from the Windows platform. An example configuration file is included in the smbtad package, in the /dist directory. We will go through a complete configuration file in this chapter, descriping all the options. The configuration file is separated by chapters, such as "general" or "network". Line beginning with # are considered comments.
# The general section defines options causing # changes for the whole application [general] # The debug level defines the verbosity in syslog # of smbtad. Values from 0 to 10 are supported, 0 # being the normal mode, and 10 being totally verbose. # Note that debug level 10 is causing a speed penalty. # If you think you've found a bug, and try to reproduce it, # please run smbtad with debug_level = 10. debug_level = 0 # use_db is the equivalent to the -U --use-db command line # argument. # if use_db is 0, any handling of the database will not be # done. # This is useful if SMBTA is only to be used with rrdriver # or smbtamonitor, and thus only relies on real time data. # Default is 1. use_db = 1 [network] # The smbtad_ip option the network address / interface that # smbtad should bind to for network operations. # it can either be: # A full IPv4 Address, such as: # smbtad_ip = 192.168.178.23 # A full IPv6 Address, such as: # smbtad_ip = ::ffff:192.168.178.31 # Or a full hostname, such as: # smbtad_ip = smbtad.host.de # (In this case smbtad will check the host for it's ip address and # uses this.) # # If the option is not given, it will default to "localhost" smbtad_ip = localhost # The query_port option defines the internet socket port # to be used for talking to clients such as # smbtamonitor. query_port = 3491 # The unix_domain_socket option specifies wether a unix domain # socket is used for the connection to the VFS module. # It's arguments are either yes, or no. unix_domain_socket = no # The unix_domain_socket_clients option specifies wether a unix # domain socket is used for the connection to real-time clients unix_domain_socket_clients = no [database] # The "name" option specifies the name of the database to be used # for smbtad. The database must have been prepared by using # smbta -T. name = dbname # # The "host" option specifies the name or IP adress of the system # running the database host = examplehost.test.ex # # The "driver" option specifies the name of the database driver # to use to access the database. Valid values are # pgsql (postgresql), mysql (mysql), or sqlite3 (sqlite) driver = pgsql # # The "user" option specifies the name of the user to use to # access the database. user = testuser # # The "password" option specifies the password of the user given # with the "user" option. password = testpassword [maintenance] # To hinder the database from growing infinite, a maintenance process is # included in smbtad. The option "interval" is telling the intervall # as to when the maintenance procedure is run. For example, if you # give "00:10:00" as argument, a maintenance procedure will be run # any ten minutes. interval = 01:00:00 # The config parameter defines how the maintenance process should work. # The format is DAYS, HH:MM:SS. For example, if you want to delete # anything in the database that is older than one day, you would # give 1,00:00:00 (which is the default). Would you like to delete # anything in the database that is older than 2 weeks, then you would # give: 14,00:00:00 as parameter. Having deleted everything that # is older than 2 hours, would be 0,02:00:00 as parameter. config = 01,00:00:00
Controlling smbtad through the rcsmbtad script
The smbtad distribution includes LSB compliant start/stop scripts, as well as to check the availability of the service. Provided you have a configuration file setup for smbtad in /etc/smbtad.conf, the scripts will use this as the configuration for smbtad. smbtad then can be
- started with:
- stopped with:
- and checked for availability with:
Checking the installation
When everything is set up, move some data on the shares you have activated the VFS module on. For example, if you write a file to a share, you can check the installation by looking into the database directly, involving the sqlite3 command line interface:
sqlite3 /var/lib/staddb $ select * from write;
You should now see entries of data written by the user you have done the transfer with. If this works, your SMBTA installation works fine und you can start pointing more shares to it.
Using the client programs
Using a configuration file with the client programs
All client programs described in the following sections can make use of a configuration file. Since any of the tools have quite similar options and parameters, a single configuration file can be used by default which is located in
Following is a sample configuration file, describing all possible options. For further questions to these options, please see the chapter about the program you are refering to below.
[general] # In general, the programs are more verbose by running them # at debug level 10. debug level 0 is the default # debug_level = 10 [network] # The "smbta_port_number" option is used for all real-time # programs that are using a direct connection to smbtad, # such as smbtamonitor or rrddriver. # It is the port number on which smbtad is listening for # incoming client connections smbta_port_number = 3491 # The "smbta_host" options is used as the host to connect # to that has smbtad running. This option is used for all # real-time programs that require a direct connection # to smbtad, such as smbtamonitor or rrddriver. smbta_host = examplehost.ex.di # The "unix_domain_socket" option is used for all real-time # programs that are using a direct connection to smbtad, # such as smbtamonitor or rrddriver. # If this option is set to something, such as "yes", # the connection to smbtad will be done by a unix domain socket # instead of a internet socket. # The default behaviour is to use an internet socket, and # if this option is not given, it won't be used. # unix_domain_socket = yes [database] # The "host" parameter is used for smbtaquery. It's argument # is the hostname or ip-address of the system that is running # the database. host = dbhost.example.ex # The "user" parameter is used for smbtaquery. It's argument # is the name of the user on the database system to use for # doing queries. user = testuser # The "password" parameter is used for smbtaquery. It's argument # is the password of the user given in the "user" parameter. password = password # The "driver" parameter is used for the libDBI driver to be # used to make the connection to, and specifies the database # that is being used. Valid values are: # pgsql (Postgresql), mysql (MySQL), sqlite3 (Sqlite3) driver = pgsql # The "name" parameter is used for the name of the database # to connect to. name = smbta-database
The possibilities to create statistical data out of the data set are quite wide ranged. Instead of querying the database directly via SQL, users may use smbtaquery. It is specialized on the setup of the database,and runs a lot of preconfigured queries to produce statistical and informational data. smbtaquery is utilizing a simplified language to operate on the users whish, translates the commands into SQL, and connects to the smbtad program to run the SQL query. The result is then printed out.
smbtaquery produces XML to represent it’s results. To convert the XML data to the desired output format, the xsltproc XSL processor is being used, and smbtaquery expects it on the system in /usr/bin/xsltproc. xsltproc is part of the libxslt package ( http://xmlsoft.org/XSLT/ ).
smbtaquery comes with stylesheets telling the xsltproc program how to translate the XML raw data to other formats. It is expecting these stylesheets in the directory /usr/share/smbtatools/.
smbtaquery command line arguments
If smbtaquery is called without enough arguments or wrong arguments, it’ll bring it’s list of available command line options as a reaction:
holger@linux-lm9n:~/Dev/smbtatools/run> ./smbtaquery smbtaquery version 1.2.5 (C)opyright 2011 by Benjamin Brunner (C)opyright 2011 by Michael Haefner (C)opyright 2011 by Holger Hetterich License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> -M --dbdriver <str> Set the libDBI database driver to use. -N --dbname <str> Set the name of the database to open. -S --dbuser <str> Set the name of the user for the database. -H --dbhost <str> Set the hostname to connect to. -P --dbpassword <str> Set the password to use. -d --debug-level <num> Set the debug level to work with to <num>. Default: 0 -c --config-file <file> Load the configuration from a file given as <file>. -q --query Run an interpreter command, or run a SQL select command. -p --command-help Interpreter command description. -f --file <file> Read the commands from a file. -x --xml <file> Output XML to file <file>. -o --output Specify the format to output. Default: ascii -k --keyfile <file> Enable encryption and load the key from <file>. -K --create-key <file> Create a key for encryption in <file>. -I --identify <num> 0 = don't run identification, 1 = run idendification (default) -C --convert run an interactive conversion/update process to convert an older database to this version of SMBTA.
- -M --dbdriver: Takes a string as argument to specify the driver to use to access the database. Valid choices are: pgsql (Postgresql) mysql (MySQL) sqlite3 (Sqlite)
- -N --dbname: Takes a string as argument to specifiy the name of the database to be used.
- -S --dbuser: Takes a string as argument to specifiy the name of the user who is accessing the database.
- -H --dbhost: Takes a string as argument to specify the hostname of the system that is running the database or the IP Address of that system.
- -P --dbpassword: Takes a string as argument to specify the password for the user to access the database.
- -d --debuglevel: The debuglevel can be set here, ranging from 1 to 10. If you want to run smbtaquery more verbose, such as seeing the SQL queries smbtaquery actually runs, set this to 10.
- -c --configfile: A configuration file can be set here, the argument takes a string. If this parameter is given, smbtaquery will load the configuration file, which overrides anything given on the command line.
- -q --query: This command line argument is used to run a query, in the language the smbtaquery interpreter provides. See the next sections for more details on this function.
- -p --command-help: This prints a help which describes every function and objects
- -f --file: Instead of taking input for a query from the -q --query command, smbtaquery can work sequentially through a file, see the next sections for more details on this function.
- -x --xml: smbtaquery in general produces xml output, that is automatically interpreted by libxslt to generate the preferred output format. If you want to force smbtaquery to write it’s xml output into a file, use this option, and provide the filename as argument.
- -o --output: Through XML processing, smbtaquery allows different output formats to choose. Currently, HTML and ascii text is supported. If this option is not given, the default will be "ascii". Current valid options are: ascii - ascii text output html - html output
- -k --keyfile: This argument enables encryption and load the key from the given file.
- -K --create-key: This option takes a string as argument, and creates a 128Bit AES key to encrypt data transfer. The string given represents the file to be created with the key. This keyfile can be used with rrddriver or smbtamonitor to encrypt data flow with smbtad.
- -I --identify: This option takes an integer as argument and is either 0 or 1. Given with 0, smbtaquery will not try to identify the objects given in a query. This can be useful, for example when smbtaquery is called from webSMBTA, which always comes with a set of pre-identified objects. If this option is set to 1, which is the default if the option is not given, smbtaquery will try to identify an object any time. See the next sections for more details on this function.
- -C --convert: If this option is given, smbtaquery will not go into normal operation, but instead provides an interactive session with the aim to convert databases from one version to the current one.
Following is an example of a smbtaquery run:
smbtaquery -H databasehost.example.ex -U dbuser -P dbpasswd -N smbtad -M pgsql -q 'global, total rw;'
Telling smbtaquery to connect to a postgresql database as user dbuser with password dbpasswd, on host databasehost.example.ex. Finally the command line option -q (or --query) provides the query to run for the build in interpreter of smbtaquery. More on this follows in the later chapters.
Output modes, saving of results to a file
By default, smbtaquery prints it’s results to the terminal it is running on. To print the results to a file, redirect the output to a file, such as:
smbtaquery -q 'global, usage rw;' > test.txt
smbtaquery is able to produce different output formats. Currently, ascii text output (which is the default setting), XML and HTML is implemented. The output format can be specified with the -o $FORMAT option:
smbtaquery -u -q 'global, usage rw;' -o html > test.html
The generated file "test.html" can then be loaded into a webbrowser for viewing.
The smbtaquery interpreter
To ease the usage of the database, smbtaquery implements a simplified language to query the database. It is specialized for SMBTA. There are two ways to run the buildin interpreter of smbtaquery. Either by using the -q switch on the command line, and run a single line of commands, or by specifying a file containing the commands to run.
In the following example of an smbtaquery call, the -q parameter is used:
smbtaquery -q 'global, total r;'
When using a file to read in commands, the -f Parameter is used. It’s argument is the filename of the file to run commands from:
smbtaquery -f testfile.txt
Any line beginning with # in the file, will be ignored as comments. At any new line in the file, one or more objects have to be defined. Here is an example file:
# Short example # Show the global usage of the Samba network global, usage rw; # # Show the sum of bytes written by user 'holger' user holger, total w;
The commands specified in the file will be run in order given in the file.
Every command is seperated by a comma, any paraeters to the command are seperated by space. The last command ends with a semicolon instead of a comma.
Here is an example query:
'global, usage rw;'
For example if you make a query like this:
'share Fritzboxtest, usage rw'
The calling of the function "usage rw" (as being introduced later in this chapter) is bound to the share "Fritzboxtest". Any results will be related to this share. The general syntax is first to name the object, and then to run the functions on.
Say "total r" is a function to get the total number of bytes read by an object. A query could then be:
'user holger, total r;'
This call would print the total number of bytes read by the user holger.
By defining more objects in a row, the interpreter conjuncts those objects with AND. For example:
'file README, share pool, total r;'
In this example we query for the file README on the share pool, and then run the total function on it.
The following object definitions are currently possible:
'share $SHARE' a Samba file service (a share) 'user $USER' a User 'file $FILE' a specific file 'global' Global. 'domain $DOMAIN' a domain.
The "global" parameter is special in the way it treats the following functions. Functions running on global are not limited by anything, and always work on the full database. Giving the following query:
'global, total rw;'
Would print out the full sum of bytes ever transferred (be it read or write).
Any functions that are called on objects can make use of time modifiers, that allow to specifiy a time range the function shall work on. The supported keywords must be used on objects and are called: FROM - TO and SINCE.
Example for FROM-TO:
global from 2011-05-25 to today, total rw;
Example for SINCE:
user holger since yesterday, total rw;
Allowed keywords for time specification are: $DATE-$TIME in the fowolling format: YYYY-MM-DD HH:MM:SS
Also, there are the following keywords making the time specification easier: yesterday, today and now.
SMBTA will try to identify the objects that given by searching through it’s database. For example, the user "holger" could exist more than once. User "holger" could be coming from two or more domains, each of these listing user "holger" with a different SID. Therefore SMBTA will look up the known SIDs of user "holger" and will present a dialog to choose the right user in case more than one user "holger" exists. As a consequence, shares are checked for domains, and files are checked for the share and the domain.
Syntax: total [RW] [R] [W]
- The total function prints out the sum of bytes transferred by an object.
- "total r" will compute the sum of bytes read.
- "total w" will compute the sum of bytes written.
- "total rw" will compute the sum of bytes transferred (read and write access).
Total function example:
#Print out the number of bytes written on the share "Fritzboxtest": 'share Fritzboxtest, total w;'
Syntax: list [users] [files]
- The list function prints a list of objects related to the given object.
- "list users" will print out the list of known users working or involved with the object.
- "list files" will print out the list of known files involved with the object.
List function example:
#Prints out all users who ever touched, read or written to file "README": 'file README, list users;' #Print out the list of known files on share "Fritzboxtest": 'share Fritzboxtest, list files;'
Syntax: top [number] [files] [users] [shares] [rw] [r] [w] [asc][desc]
- The top function prints out a number of top files, users, or shares by read, write or read and write access.
- The "asc" and "desc" arguments are optional. The sort direction of the function can be changed by adding one of these arguments.
Top function example:
#Print out the 10 most used files on share "Fritzboxtest" by read access: 'share Fritzboxtest, top 10 files r;' #Print out the 10 most used shares on the Samba network: 'global, top 10 shares rw;'
Syntax: last_activity [number]
- The last_activity function prints out a list of actions an object has been involved in.
last_activity Function example:
#Print out the last 10 actions of user holger: 'user holger, last_activity 10;' #Print out the last 10 actions where file "README" has been involved in: 'file README, last_activity 10;'
Syntax: usage [rw|r|w]
- The usage function sums up the usage or activity of an object by creating a virtual day, listing 24 hours and showing the average data activity by percentage.
usage Function example:
#Print a graph of the total usage of the Samba network: 'global, usage rw;' #Print a graph of the usage of share "Fritzboxtest" by read-access: 'share Fritzboxtest, usage r;'
Syntax: search [term]
- The search function allows a fuzzy search for [term] over the whole database.
- It allows SQL-style wildcards like %*. If the function finds data that matches the search string, it will identify the object and shows related data. For example, if it finds a user name that matches to [term], it will identify it as a user, and additionally prints the domain the user is belonging to.
Search function example:
#Fuzzy search for the term disk12: 'global, search %disk12%;'
Syntax: throughput [num] [minutes|days|seconds|hours] [r|rw|w]
- The throughput function calculates the throughput of data of the last [num] minutes, day, seconds, or hours.
throughput function example:
#Sum up the read-only throughput of the last 50 days on share "Fritzboxtest". 'share Fritzboxtest, throughput 50 days r;'
webSMBTA is a web interface for SMB Traffic Analyzer. It is using the smbtaquery program as a data provider and presents a modern, intuitive, rails based web application.
webSMBTA relies on a fully working SMBTA setup, including a working database, and the smbtaquery program installed in system paths. If you can run a query like global, total rw; via smbtaquery, all should be fine.
Enter the "websmbta"-directory (e.g. for git sources "smbtatools/src/query/webui/")
if you use SUSE
- add the Ruby repository (e.g. http://download.opensuse.org/repositories/devel:/languages:/ruby:/extensions/SLE_11/x86_64/) to zypper
zypper ar http://download.opensuse.org/repositories/devel:/languages:/ruby:/extensions/SLE_11/x86_64/ Ruby
- install the needed packages
zypper in ruby rubygems rubygem-rails-3_0 rubygem-sqlite3 rubygem-bcrypt-ruby sqlite3-devel
- create the initial database
- webSMBTA can be started by running $rails server in this directory.
- open a Browser and enter the URL hostname:3000 (e.g. localhost:3000)
- rename Gemfile.old to Gemfile
- install ruby and ruby-gems
- run $sudo gem install rails --version >3.0.3 (installs rails3)
- run $sudo bundle install (installs needed ruby gems for websmbta)
- webSMBTA can be started by running $rails server in this directory.
- open a Browser and enter the URL hostname:3000 (e.g. localhost:3000)
Tested Browsers are Mozilla Firefox, Chromium, Internet Explorer, Safari
You can connect to webSMBTA per entering the hostname and the port where your rails server is running (default 3000) e.g.
At first startup, webSMBTA will show a sign up dialog like this:
You have to create an first account, which is automatically an administrator account.
After you have created your account you have to log in and configure the connection to the smbta database:
- The field DB-host takes the hostname of the system that is running the database, or the ip-address of that system.
- The field DB-name takes the name of the database on the system specified by DB-host.
- The field DB-driver is a select box and let’s you choose the database driver to use to access the database.
- pgsql is a PostgreSQL database.
- mysql is a MySQL database.
- sqlite is a Sqlite3 based database.
- The field DB-user takes the username of the user that has access to the database specified in DB-name.
- The field DB-password takes the password of the user specified in DB-user.
Click the button Commit settings to let webSMBTA connect to the database and initiate the first data view.
First data view, "global"
After committing the configuration settings, webSMBTA will jump into the first data view that looks like this:
As you can see, the view is called "Global", which means that the program is operating over the whole database, not taking any special SMB related objects into account. Like smbtaquery, webSMBTA is works based on objects, and the "Global" object is special in the way that it runs over the whole database.
You surely notice the arrow to the right, showing that there is more to explore. By clicking on the "global" entry in the selection field, the next data view will appear.
Second data view, "domains"
After clicking the "global" selection, webSMBTA will do a query on the database automatically to find out the list of domains that the SMBTA installation knows about.
If you click on one of the domains in the selection area, this domain will be chosen as an object to work with, and from now on webSMBTA will bound all it's results to this domain.
As you can see, the first entry in the selection area is "(All)", which you can use to de-select a domain. If you click this selection, webSMBTA will operate with "Global" as the object (see previous section).
After choosing an object in the "domains" selection, webSMBTA will automatically do a query on the database to find out the list of shares and the list of users on the domain you have selected. Two selection areas will appear, one for the shares under this domain and one for the users that have been involved with data transfers on the chosen domain.
This view is special, as it allows you to select one share, one user, or one user and one share. In the example picture shown above, user "Hettich" is selected, and share "trigger". This means that webSMBTA will run any operations belonging to the user "Hettich" on the share "trigger". For example, if you de-select the share "trigger" by clicking on "(All)" in the share-selection, webSMBTA will run operations belonging to the user "Hettich" on the selection domain, but not limited to the share "trigger".
Fourth data view, "files"
If you have chosen a user or a share, or both, webSMBTA will automatically do a query on the database for the list of files that have been touched by the object that has been chosen so far. Clicking on one of the files in that selection, will make webSMBTA process all operations over this specific file.
It's possible to search an object in the database. If you type in the search-string you get a self-refreshed list of objects, where you can select the needed one. webSMBTA selects the object itself in the objectselector.
Running function on selected objects
If you have succesfully chosen an object with the object selector, you can run one of smbtaqueries functions on it. Supported are all functions that SMBTAquery does support, as described in the smbtaquery chapter.
The search function allows a fuzzy search for [term] over the whole database or an object. It allows SQL-style wildcards like '%*'. If the function finds data that matches the search string, it will identify the object and shows related data. For example, if it finds a user name that matches to [term], it will identify it as a user, and additionally prints the domain the user is belonging to.
- search string
The list function prints a list of objects related to the given object.
"list users" will print out the list of known users working or involved with the object.
"list files" will print out the list of known files involved with the object.
- object (shares, users, files)
The total function prints out the sum of bytes transferred by an object.
"total r" will compute the sum of bytes read.
"total w" will compute the sum of bytes written.
"total rw" will compute the sum of bytes transferred (read and write access).
- mode (read, write, read/write)
The top function prints out a number of top files, users, or shares by read, write or read and write access.
The "asc" and "desc" arguments are optional. The sort direction of the function can be changed by adding one of these arguments.
- object (shares, users, files)
- mode (read, write, read/write)
- number of listed objects
- sort-mode (descending, ascending)
The usage function sums up the usage or activity of an object by creating a virtual day, listing 24 hours and showing the average data activity by percentage.
- mode (read, write, read/write)
The last_activity function prints out a list of actions an object has been involved in.
- number of last activities
The throughput function calculates the throughput of data of the last [num] minutes, day, seconds, or hours.
- time periode (number and unit)
- mode (read, write, read/write)
Any functions that are called on objects can make use of time modifiers, that allow to specifiy a time range the function shall work on.
It's possible to type in the timestamp manually in the following format:
The second way is to select the time from a calendar
Printview, Refresh, Remove
Every rendered functions has three icons on the top right side.
There are two options.
Opens the specific function in a new tab or window.
Offers a downloadable textfile with the specific function.
Refresh the specific function with the current data from the database.
Removes the specific function, when it isn't needed anymore.
The administrator can create new user-accounts, change passwords and usernames for each user and remove accounts.
A regular user only can change his username and password. For removing the account, please contact the administrator.
smbtamonitor allows to view Samba traffic in real-time. The program connects directly to smbtad via the network. To allow real-time, a special feature in smbtad has been implemented. Instead of receiving data from the SQL storage, smbtad filters and sends directly to smbtamonitor when receiving a data package from a vfs_smb_traffic_analyzer VFS module. The smbtamonitor program is separated into a generic process making the connection to smbtad, and frontends, that are connecting to the subprocess by a unix domain socket.
smbtamonitor-cli is a command line tool, which can be used to test the connection to smbtad, or to consume the data by another program. It resembles the simplest smbtamonitor backend one can use.
smbtamonitor-qt is a QT based program, showing the traffic in real time using a graph. It is currently in development, and documentation has not yet been written.
To start a monitor, use the same arguments for the host and internet port to connect to as with smbtaquery:
smbtamonitor-cli -h examplehost.de.ex -i 3491 --share "Distribution Space"
Or, alternativly let smbtamonitor connect through a unix domain socket to smbtad, by invoking the -n switch:
smbtamonitor-cli -n --share "Distribution Space"
This command will start a real time monitor that will display information about the share named "Distribution Space". Likewise, it's possible to run:
smbtamonitor-cli -h examplehost.de.ex -i 3491 --user holger
which will run a monitor displaying information about the user holger, and:
smbtamonitor-cli -h examplehost.de.ex -i 3491 --file README
will run a monitor displaying real time information about the file named "README".
The round robin database rrdtool is famous for it's ease of use and robustness (see http://www.mrtg.org/rrdtool/ ). With rrdtool, graphics on the throughput of the data can easily be created. rrddriver is a SMBTA component that acts as an interface to rrdtool. The user can, networked or unix-domain socket driven, connect to smbtad, receive real time data on read and write processes of or on objects and build a round robin database out of it by employing rrddriver. Please note that rrdtool must be installed on the machine you run rrddriver. The user can run more rrddriver instances, each of them feeding it's own database.
rrddriver command line arguments
holger@linux-xnjq:~/t/smbtatools/run> ./rrddriver rrddriver version 1.2.5 (C)opyright 2010 by Michael Haefner (C)opyright 2010 by Benjamin Brunner (C)opyright 2010 by Holger Hetterich License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> -i --inet-port <num> Set the port-number to use to <num>. -h --host <string> Set the host name to connect to. -n --unix-domain-socket Use a unix domain socket to communicate with smbtad. -d --debug-level <num> Set the debug level to work with to <num>. Default: 0 -c --config-file <file> Load the configuration from a file given as <file>. -s --share <string> Specify a share to monitor. -u --user <string> Specify a user to monitor. -f --file <string> Specify a file to monitor. -g --global Global mode, run over the full data set. -D --domain Specify a domain to monitor. -t --timer <num> Number of seconds defining the intervall to update the rddtool database. Default: 10 seconds -b --database <string> database filename -r --rrdtool-setup rrdtool-setup string Default is: DS:readwrite:GAUGE:10:U:U DS:read:GAUGE:10:U:U DS:write:GAUGE:10:U:U -k --keyfile Read encryption key from given file. -I --identify 0 or 1. if 0, no identification is done. Default is 1.
- -i --inet-port <num>: If you want to connect rrddriver to smbtad through an internet socket, specify the port number here.
- -h --host <string>: If you want to connect rrddriver to smbtad through an internet socket, specify the host name here.
- -n --unix-domain-socket: Using this option, rrddriver connects to a unix domain socket on /var/tmp/stadsocket.
- -d --debug-level <num>: rrddriver can be made more verbose by setting a higher debug level. The default is 0, the maximal debug level is 10.
- -c --config-file <file>: This argument loads a configuration from a given file which can include e.g. the connection to the smbtad-database.
- -s --share <string>: Like in the other real-time programs of SMBTA, you have to specify an object to monitor. If you want to monitor a share, use this option and enter the name of the share as the argument.
- -u --user <string>: Like in the other real-time programs of SMBTA, you have to specify an object to monitor. If you want to monitor a user, use this option and enter the name of the user as the argument.
- -f --file <string>: Like in the other real-time programs of SMBTA, you have to specify an object to monitor. If you want to monitor a file, use this option and enter the name of the file as the argument.
- -D --domain <string>: Like in the other real-time programs of SMBTA, you have to specify an object to monitor. If you want to monitor a domain, use this option and enter the name of the domain as the argument.
- -g --global: Use this option to monitor the overall traffic instead of the traffic of a specific object.
- -t --timer <num>: This option is handed over to rrdtool, when a new database is created. It specifies the intervall, with which data is being inserted into the round robin database. This defines the granularity of the database. rrddriver is always waiting <num> seconds, in that time it is adding the incoming traffic, and when <num> seconds are gone, it inserts the sum of the traffic into the database. The default value is 10 seconds.
- -b --database <string>: This option defines the name of the database file that is being created, or used if the database file already exists.
- -r --rrdtool-setup <string>: Upon creating a new rrdtool database, the string given with this option will be used to setup the database for rrdtool. It is defining three incoming values, read-only, write-only, and read-write. Please consult the rrdtool documentation for details on setting up data sources.
The Default for this option is:
DS:readwrite:GAUGE:10:U:U DS:read:GAUGE:10:U:U DS:write:GAUGE:10:U:U
- -k --keyfile: This option enables encryption and reads the key from a given file.
- -I --identify <num>: By default, rrddriver runs an identification process, that queries the database of smbtad. However the database handling of smbtad can be shut down by the administrator, if SMBTA is only to be used with rrddriver or smbtamonitor. Ther efore the -I --identify command line switch can be used to shut down identification at startup of rrddriver. If this parameter is set to 0, identification will be ommited.
rrddriver usage examples
All of the following examples will use the database file "myrrd", as given with the -b parameter.
To start rrddriver, use the same arguments for the host and internet port to connect to as with smbtaquery:
rrddriver -h examplehost.de.ex -i 3491 -b myrrd --share "Distribution Space"
Or, alternativly let rrddriver connect through a unix domain socket to smbtad, by invoking the -n switch:
rrddriver -n -b myrrd --share "Distribution Space"
This command will start rrddriver for the share named "Distribution Space". Likewise, it’s possible to run:
rrddriver -b myrrd -h examplehost.de.ex -i 3491 --user holger
which will run rrddriver for information about the user holger, and:
rrddriver -b myrrd -s 2 -h examplehost.de.ex -i 3491 --file README
will run rrddriver for monitoring the file README, and will update the database every 2 seconds instead of the default, 10 seconds.
To create a usage graphic in PNG format, you can invoke rrdtool to create it:
rrdtool graph packets.png -s 1290772099 -S 1 --title "Throughput on share 'pool1'" DEF:read_in=testdb:read:AVERAGE DEF:write_in=testdb:write:AVERAGE "AREA:write_in#AA0000:Write" "STACK:read_in#AA9999:Read"
This line will create a PNG graphic showing a diagram, titled "Troughput on share pool1, showing the read and write traffic, stacked, from the unix time format you gave with the -s parameter. Please consult the rrdtool documentation for more details.
The smbtatorture program is a small test suite for SMBTA. It’s being used mainly by SMBTA developers to do long time tests checking the stability of the software chain, and how it reacts on large amounts of data. Also it is being used to do performance measurement when SMBTA is involved in Samba traffic. smbtatorture can mimic "usual" office traffic loads, or continuous stress testing by making defined pauses while creating traffic. It is able to measure the time it needs for it’s own run, and is also able to record and playback it’s own run, so that software defects can be reproduced in other setups, and performance measurement can be done. Basically a single smbtatorture instance connects to the samba server as one user, and operates on two shares. It then copies a defined set of files from and to the share. To connect to a CIFS server, smbtatorture is utilizing the libsmbclient library.
Several smbtatorture processes can be run in parallel, accessing the same set of shares on a Samba server. The processes shall not use the same files. To prevent this situation, smbtatorture can optionally connect to smbtatorturesrv, which distributes unique filenames to any smbtatorture process it has a connection to.
smbtatorture command line arguments
smbtatorture version 1.2.5 - small testingsuite for smbta (C) 2009-2011 Michael Haefner (C) 2009-2011 Holger Hetterich License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> -u --username The user smbtatorture should operate on. Default: john_doe -w --workgroup The workgroup smbtatorture should operate on. Default: WORKGROUP -p --password Password for the user. Default: password -h --help This help text. -1 --share1 SMB URL of first share to be used. -2 --share2 SMB URL of second share to be used. -c --copy How many files will be copied Default: infinite -r --record filename of saved torture-set won't work actually -t --time max time in seconds we should wait between each copy action. -s --size size of all files, e.g. 500M or 1.5G -n --number Number of generated files Default: 20 -v --verbose be verbose -e --replay filename of the file to replay. When running networked with smbtatorturesrv: -P --port Port to connect to. -H --host hostname to connect to.
- -u --username: Specify a username that smbtatorture should use to connect to the Samba server.
- -w --workgroup: Specify the default workgroup smbtatorture should work on. The default is : WORKGROUP
- -p --password: Set the password for the user given with the option -u.
- -h --help: Print out a help text on the command line.
- -1 --share1: Specify the SMB Url of the first share to be used for copying when running.
- -2 --share2: Specify the SMB Url of the second share to be used for copying when running.
- -c --copy: Specify how many files smbtatorture will copy between the two shares. If not given, it will copy until either something in the software chain breaks or an other error occurs.
- -r --record: Specify a filename where smbtatorture will record it’s own run. The run can be replayed with the -e option.
- -t --time: Specify the maximum time in seconds, smbtatorture should wait between a copy action. If this is 0, smbtatorture does continuous stress testing. The actual pause that smbtatorture is doing is computed as a random number of seconds between the number of seconds given and 0.
- -s --size: Specify the size of all files that smbtatorture will create. For exmaple, if you specify -s 20MB, smbtatorture will create a set of files that is 20MB in size on both shares, creating a total size of 40 MB.
- -n --number: Specify the number of files smbtatorture will create. For example, if you specify -n 20, smbtatorture will create a set of 20 files, all together with the size given by the -s parameter on both shares, creating a total number of files of 40.
- -v --verbose: If given, smbtatorture will be more verbose on what it is doing.
- -e --replay: Specify a file saved by the -r option, to replay the exact same run.
- -P --port: Port number for the smbtatorturesrv connection (see the next section for details).
- -H --host: Hostname of the system that is running smbtatorturesrv (see the next section for details).
Running smbtatorture networked and in parallel
Some more complex testing environments feature more users, more shares, and more connections for Samba and smbtad to handle. If more than a single smbtatorture process is running, those should not touch the same files at the same time. Therefore, a program called *smbtatorturesrv* is available, which is distributing unique filenames to the processes. The *smbtatorture* program is optionally connecting through an internet socket to this program, to fetch filenames from smbtatorturesrv. To run smbtatorture connected to smbtatorturesrv involves the *-P* and *-H* parameters. *-P* defines the port number to connect to, and *-H* specifies the hostname of the system that is running smbtatorturesrv.
smbtatorture -P 3493 -H localhost -v -c 100 -n 20 -t 10 -s 40MB -r testrun.txt -u holger -p the_password -1 smb://localhost/pool1/ -2 smb://localhost/pool2/
This call would run *verbose*, run with a *maximum time of 10 seconds* between each file operation, create *20 files* with the *overall size of 40 MB*, and connect to *smbtatorturesrv* on *port 3493* on host *localhost* to receive unique filenames.
The smbtatorturesrv program is used when multiple instances of smbtatorture are running against two or more shares. In its current implementation, it is serving unique filenames to the smbtatorture client processes.
holger@linux-xnjq:~/t/smbtatools/run> ./smbtatorturesrv -h -p NUMBER set the portnumber to listen on -v --verbose be verbose. -V --version print version. -h --help this help text.
To make smbtatorturesrv listen on port 3493, the user would issue the following command:
smbtatorturesrv -p 3493
smbtatorture usage examples
The following example will create 20 files on each shares "pool1" and "pool2", connects as user "holger" with password "the_password". During the run, smbtatorture will output message, being verbose.
smbtatorture -v -u holger -p the_password -1 smb://localhost/pool1/ -2 smb://localhost/pool2/
The following example will create 10 files of size 40MB on each shares "pool1" and "pool2", connects as user "holger" with password "the_password", being verbose, and records it's own run into file "testrun.txt". It will copy the files 20 times.
smbtatorture -v -c 20 -n 10 -s 40MB -r testrun.txt -u holger -p the_password -1 smb://localhost/pool1/ -2 smb://localhost/pool2/
The following example will replay the run stored in the file "testrun.txt" on the shares "pool1" and "pool2", connect as user "holger" with password "the_password", be verbose.
smbtatorture -v -e testrun.txt -1 smb://localhost/pool1/ -2 smb://localhost/pool2/
The SMBTA Stresstest appliance
The SMBTA Stresstest appliance is a self contained linux distribution based on openSUSE. It comes with a preconfigured Samba server that is configured with SMBTA on it's shares, and it is running several instances of the smbtatorture program on these shares, for several users, resulting in producing an continous flow of traffic on this shares. The appliance is completely self-running, starting the smbtatorture processes directly after booting. Because of this, the SMBTA Stresstest appliance makes an ideal tool for two things: first is to develop SMBTA, and second it is an easy way to give SMBTA a quick test in a safe environment.
In SMBTA Stresstest, the smbtad daemon program is configured for port 3491 to listen for client connections. If you setup the virtual machine in a way that it's reachable for the host system, you can run the smbtatools directly against it.
SMBTA Stresstest is available from SUSE Studio at: http://susestudio.com/a/tLEB1d/smbta-stresstest-smbtad