Difference between revisions of "Rsync based SysVol replication workaround"

(Setup on all other Domain Controller(s))
m (/* added 'Emulator' where required)
Line 21: Line 21:
 
* etc.
 
* etc.
  
If you prefer to use rsync through a SSH tunnel, you can adapt the command to your needs, but usually there's no confidential content on the SysVol share. It should be sufficient for most to use an unencrypted transfer. The rsync module on the PDC is also defined as read only, because it is used only as the source, so no content can be pushed to it.
+
If you prefer to use rsync through a SSH tunnel, you can adapt the command to your needs, but usually there's no confidential content on the SysVol share. It should be sufficient for most to use an unencrypted transfer. The rsync module on the PDC Emulator is also defined as read only, because it is used only as the source, so no content can be pushed to it.
  
  
Line 47: Line 47:
 
  }
 
  }
  
* Create the file <tt>/etc/rsyncd.conf</tt> (adapt the path variable to your PDCs SysVol path):
+
* Create the file <tt>/etc/rsyncd.conf</tt> (adapt the path variable to your PDC Emulators SysVol path):
  
 
  [SysVol]
 
  [SysVol]
Line 72: Line 72:
 
* Install rsync by using your package manager or compile from source. Make sure, that you use a version that supports extended ACLs!
 
* Install rsync by using your package manager or compile from source. Make sure, that you use a version that supports extended ACLs!
  
* Create a password file <tt>/usr/local/samba/etc/rsync-sysvol.secret</tt> and fill it with the password you set on the PDC for the <tt>sysvol-replication</tt> rsync account (permissions of that file must not be world-readable!):
+
* Create a password file <tt>/usr/local/samba/etc/rsync-sysvol.secret</tt> and fill it with the password you set on the PDC Emulator for the <tt>sysvol-replication</tt> rsync account (permissions of that file must not be world-readable!):
  
 
  pa$$w0rd
 
  pa$$w0rd
Line 78: Line 78:
 
* For replicating the SysVol folder, run the following command (<tt>--dry-run</tt> means that no modifications are actually made):
 
* For replicating the SysVol folder, run the following command (<tt>--dry-run</tt> means that no modifications are actually made):
  
  # rsync --dry-run -XAavz --delete-after --password-file=/usr/local/samba/etc/rsync-sysvol.secret rsync://sysvol-replication@{IP-of-you-PDC}/SysVol/ /path/to/your/sysvol/folder/
+
  # rsync --dry-run -XAavz --delete-after --password-file=/usr/local/samba/etc/rsync-sysvol.secret rsync://sysvol-replication@{IP-of-your-PDC-Emulator}/SysVol/ /path/to/your/sysvol/folder/
 
   
 
   
 
  receiving file list ... done                                                                                                                                                                                   
 
  receiving file list ... done                                                                                                                                                                                   
Line 110: Line 110:
 
* To automate synchronisation, you can run the command via cron (e. g. every 5 minutes).
 
* To automate synchronisation, you can run the command via cron (e. g. every 5 minutes).
  
  */5 * * * *          rsync -XAavz --delete-after --password-file=/usr/local/samba/etc/rsync-sysvol.secret rsync://sysvol-replication@{IP-of-you-PDC}/SysVol/ /path/to/your/sysvol/folder/
+
  */5 * * * *          rsync -XAavz --delete-after --password-file=/usr/local/samba/etc/rsync-sysvol.secret rsync://sysvol-replication@{IP-of-your-PDC-Emulator}/SysVol/ /path/to/your/sysvol/folder/
  
* Repeat these steps on every DC (except your PDC!).
+
* Repeat these steps on every DC (except your PDC Emulator!).
  
 
= FAQ =
 
= FAQ =

Revision as of 10:02, 16 January 2019

Introduction

Samba AD currently doesn't provide support for SysVol replication. To achive this important feature in a Multi-DC environment, until it's implemented, workarounds are necessary to keep it in sync. This HowTo provides a basic workaround solution based on rsync.



Information on rsync-based replication

Group Policy Management Console option for PDC

This HowTo describes a solution for SysVol replication based on rsync. This tool is unidirectional, this means files can only be transferred in one direction. That's why for rsync-based SysVol replication, you have to choose one DC on which you do all modifications (GPO edits, logon script changes, etc.). All other DC's retrieve the changes from this host, this is because modifications on them are overwritten when syncing.

A good choice for this "master" host is the one that contains the FSMO role "PDC Emulator", because you can configure the Group Policy Management Console to connect only to this machine (default), instead of just choosing any of your DC's. You can define at „Action“ / „Change Domain Controller“ which machine the GPMC connects to. There you should select „The domain controller with the Operations Master token for the PDC emulator“ (default).

Even if the unidirectional replication of rsync is a limitation, it has also many advantages:

  • already available on most distributions and can be installed through it's package manager (if it's not already installed anyway)
  • very quickly setup
  • very easily configured
  • etc.

If you prefer to use rsync through a SSH tunnel, you can adapt the command to your needs, but usually there's no confidential content on the SysVol share. It should be sufficient for most to use an unencrypted transfer. The rsync module on the PDC Emulator is also defined as read only, because it is used only as the source, so no content can be pushed to it.



Setup the SysVol replication

Setup on the Domain Controller with the PDC Emulator FSMO role

  • Install rsync by using your package manager or by compiling from source. Make sure that you use a version that supports extended ACL's!
  • If you start your rsync-server through xinetd, you can use the following configuration file (/etc/xinetd.d/rsync):
service rsync
{
   disable         = no
   only_from       = 10.99.0.0/28     # Restrict to your DC address(es) or ranges, to prevent other hosts retrieving the content, too.
   socket_type     = stream
   wait            = no
   user            = root
   server          = /usr/bin/rsync
   server_args     = --daemon
   log_on_failure += USERID
}
  • Create the file /etc/rsyncd.conf (adapt the path variable to your PDC Emulators SysVol path):
[SysVol]
path = /usr/local/samba/var/locks/sysvol/
comment = Samba Sysvol Share
uid = root
gid = root
read only = yes
auth users = sysvol-replication
secrets file = /usr/local/samba/etc/rsyncd.secret
  • Create a file /usr/local/samba/etc/rsyncd.secret (permissions must not be world-readable!) with the following content (adapt the password!):
sysvol-replication:pa$$w0rd
  • Restart xinetd.


Setup on all other Domain Controller(s)

  • Install rsync by using your package manager or compile from source. Make sure, that you use a version that supports extended ACLs!
  • Create a password file /usr/local/samba/etc/rsync-sysvol.secret and fill it with the password you set on the PDC Emulator for the sysvol-replication rsync account (permissions of that file must not be world-readable!):
pa$$w0rd
  • For replicating the SysVol folder, run the following command (--dry-run means that no modifications are actually made):
# rsync --dry-run -XAavz --delete-after --password-file=/usr/local/samba/etc/rsync-sysvol.secret rsync://sysvol-replication@{IP-of-your-PDC-Emulator}/SysVol/ /path/to/your/sysvol/folder/

receiving file list ... done                                                                                                                                                                                   
created directory /usr/local/samba/var/locks/sysvol                                                                                                                                                            
./                                                                                                                                                                                                             
samdom.example.com/                                                                                                                                                                                            
samdom.example.com/Policies/                                                                                                                                                                                   
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/                                                                                                                                            
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/GPT.INI                                                                                                                                     
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/MACHINE/                                                                                                                                    
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/MACHINE/Registry.pol                                                                                                                        
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/USER/                                                                                                                                       
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/USER/Documents & Settings/                                                                                                                  
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/USER/Scripts/                                                                                                                               
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/USER/Scripts/Logoff/
samdom.example.com/Policies/{31B2F340-016D-11D2-945F-00C04FB984F9}/USER/Scripts/Logon/
samdom.example.com/Policies/{6AC1786C-016F-11D2-945F-00C04FB984F9}/
samdom.example.com/Policies/{6AC1786C-016F-11D2-945F-00C04FB984F9}/GPT.INI
samdom.example.com/Policies/{6AC1786C-016F-11D2-945F-00C04FB984F9}/MACHINE/
samdom.example.com/Policies/{6AC1786C-016F-11D2-945F-00C04FB984F9}/USER/
samdom.example.com/scripts/
samdom.example.com/scripts/logonscript.bat

sent 124 bytes  received 1064 bytes  2376.00 bytes/sec
total size is 1207  speedup is 1.02 (DRY RUN)
Warning: Make sure that the destination folder is really your SysVol folder, because the command will replicate to the given directory and removes everything in it that isn't also on the source! You could damage your system! So check the output carefully to see if the replication is doing what you expect!
  • If everything looks sane, run the command without the --dry-run option and let rsync do the replication.
  • To automate synchronisation, you can run the command via cron (e. g. every 5 minutes).
*/5 * * * *          rsync -XAavz --delete-after --password-file=/usr/local/samba/etc/rsync-sysvol.secret rsync://sysvol-replication@{IP-of-your-PDC-Emulator}/SysVol/ /path/to/your/sysvol/folder/
  • Repeat these steps on every DC (except your PDC Emulator!).

FAQ

  • Why can't I simply use a distributed filesystem like GlusterFS, Lustre, etc. for SysVol?
    • A cluster file system with Samba requires CTDB to be able to do it safely. And CTDB and AD DC are incompatible.