Mounting samba shares from a unix client
Using a share from a samba server within a unix filesystem depends on a lot of single components. You need at least the smbfs (which is no longer maintained) or the modern cifs kernel modules. Although older documentation says to use the smbfs, it has many restrictions and the cifs should be favoured. That said, I'll describe only the cifs module in this document.
Since the cifs filesystem is included in the standard Linux kernel, it is simple to build it either as module or built in. If you build the cifs module (e.g. to get a newer version with bugfixes) and do not install it in the default location, then you may need to load it prior to mount a share or let modprobe load it via modprobe.conf in order to get the newer cifs module rather than the one shipped with your distribution.
The basic mount command is mount -t cifs //<server>/<share> <mountpoint>. Each component needs its own attention.
The mount utility calls a mount helper, usually mount.cifs which calls into the kernel. The mount helper mount.cifs is the user space helper and needed to parse tcp/ip names and retrieve userid and password, and also does simple formatting of the mount options.
Server's listen for incoming client connections via TCP/IP and thus have ip addresses, and usually tcp host names configured for them, but users often refer to the server by its "netbios name" (RFC1001 name). To mount using the cifs client, a tcp name (rather than netbios name) must be specified for the server. To resolve the <server> to a ip address, you need either a DNS server which knows the ip address or your client needs the nss module wins. It is a shared library which must be in the path of your ldd. Usually under /usr/lib. You also have to add the wins option to hosts in your /etc/nsswitch.conf. The smbclient utility can also be used to identify the tcp name or ip address of a server (identified by its netbios name).
mountpoint must be a directory elsewhere in the filesystem which must exist.
Common mount.cifs options
Now an explaination of the options for mount -t cifs as described in man mount.cifs mount.cifs takes a lot of options, some of them are really confusing. I'll try to mention the most important here.
- user=<user> or username=<user>: Thats the user <user> which is used to authenticate against the server. If this is not given, then the environment variable USER is used. This option can also take the form "user%password" or "workgroup/user" or "workgroup/user%password" to allow the password and workgroup to be specified as part of the username.
- pass=<password> or password=<password>: specifies the CIFS password. If this option is not given then the environment variable PASSWD is used. If the password is not specified directly or indirectly via an argument to mount mount.cifs will prompt for a password, unless the guest option is specified.
- credentials=<filename>:specifies a file that contains a username and/or password. This is preferred over having passwords in plaintext in a shared file, such as /etc/fstab. Be sure to protect any credentials file properly. The format of the file is:
- uid=<uid-spec>: sets the uid that will own all files on the mounted filesystem. It may be specified as either a username or a numeric uid. This parameter is ignored when the target server supports the CIFS Unix extensions (which samba does per default unless you disable it).
- gid=<group-spec>: sets the gid that will own all files on the mounted filesystem. It may be specified as either a groupname or a numeric gid. This parameter is ignored when the target server supports the CIFS Unix extensions.
- domain=<domain|workgroup>: sets the domain (workgroup) of the user
- ip=<ip-addr>: sets the destination host or IP address.
- guest: mount the share as guest and don't prompt for a password.
There are other options but they are not that important to be usefull beside performance and really specific things.
NetBios name resolution with WINS
All networking programs at some point need to resolve a host name to an IP-Address. Usually this is done with a call to the function gethostbyname. This call is a library function and thus is handled in user space. Glibc systems such as Linux have the feature of using more than one lookup method to fulfill such a query. This is known as nsswitch (Name Service Switch). The config file is usually found in /etc/nsswitch.conf.
If a program wants to resolve the ip address of a host named 'wiki' it simply calls the function gethostbyname. The lookups done are the responsibility of the underlying glibc then. Glibc reads the /etc/nsswitch.conf and loads the library mentioned in the hosts line. Thats the key point: if there is a wins entry, glibc loads the libnss_wins.so which enables the NetBios Name Lookup. You got it then, you can resolve a Windows Name to an ip address.
So its simple: install the libnss_wins.so, add to your /etc/nsswitch.conf at line hosts the wins entry and the windows name resolution works. Your network setup should be ok for this, but thats not a matter of samba.
Step by Step list to get it working
TODO: make a step by step list to solve most of the problems
Here's the verbatim commands I used (SuSE 10.0 to Buffalo Link Station). Notice I knew the IP address, in my case the SMB name didn't work and I didn't bother making the Network Name "NetBios Name" Work as suggested above.
su (make sure you do this as root) mkdir /mnt/linky_share mount -t cifs -o user=luke //192.168.1.104/share /mnt/linky_share <enter> it then prompts for your Fileshare password. voila! now you can treat it as your file system.
#note I thought "mount -t cifs -o guest" should work but I got a permission error even though # I have shares that don't have access restriction...
If you want to automatically mount shares at user logon time the only way I found is doing it with the pam_mount module. It is the only way to do an authenticated mount without requiring the user to store the password in a file or entering it on a terminal.
=For more information
The Linux CIFS client (http://linux-cifs.samba.org) user's guide can be found at: http://pserver.samba.org/samba/ftp/cifs-cvs/linux-cifs-client-guide.pdf or http://pserver.samba.org/samba/ftp/cifs-cvs/linux-cifs-client-guide.odt
--Rcsu 21:40, 4 March 2006 (UTC)