Joining a Samba DC to an Existing Active Directory: Difference between revisions

From SambaWiki
(Update supported forest functional levels)
m (/* Changed 'Built-in Groups GID Mappings' heading to 'Built-in User & Group ID Mappings', updated text.)
(44 intermediate revisions by 2 users not shown)
Line 1: Line 1:
= Introduction =
= Introduction =


Running one domain controller (DC) is sufficient for a working Active Directory (AD) forest. However, for failover and load balancing reasons, you should add further DCs to your AD forest. Joining an additional Samba DC to an existing AD differs from provisioning the first DC in a forest. If you set up a new AD forest, see [[Setting_up_Samba_as_an_Active_Directory_Domain_Controller|Setting up Samba as an Active Directory Domain Controller]].
The minimum number of Domain Controllers in an Active Directory forest is one. However, in an enterprise environment, it is always recommended to add further DCs, to provide failure safety, high availability and load balancing. For fail-over reasons, at least two DCs are recommended. Depending on your network, there can be many different reasons in deciding just how many DCs are required. A common scenario is, an AD forest is spread across multiple locations, connected via VPN or the like, here it is reasonable to have at least one DC at each site. This keeps AD services available everywhere, even if the branch office is temporary not connected to the central office. Unless you're running a RODC, each Domain Controller has a write-enabled database, this allows changes inside the AD to be done on every DC. Password changes, user creation, domain joins, etc. will still possible, even if other DCs are temporary not available due to e. g. network outages and users on each site can continue to authenticate and work with local servers without problems.


{{Imbox
An NT4 domain has only one Primary Domain Controller (PDC) and possibly additional Backup Domain Controllers (BDC). In an AD forest there's no such difference any more, there is no such thing as a "master server" , They are all simply called "Domain Controller" (DC) and are equal. Please use only this term, when talking about an Active Directory, to avoid confusion, especially when asking for help.
| type = note
| text = An NT4 domain uses only one Primary Domain Controller (PDC) and optionally additional Backup Domain Controllers (BDC). In an AD forest, there is no difference between DCs, beside the [[Flexible_Single-Master_Operations_(FSMO)_Roles|FSMO roles]]. Use only the term "domain controller" or "DC" when you talk about AD to avoid any possibility of confusion.
}}


The process of joining a new Samba DC to an existing AD differs in some points to [[Setup_a_Samba_Active_Directory_Domain_Controller|provisioning a new domain]]. The following steps for joining a Samba DC to an existing domain are the same - regardless if the existing AD is based on Windows or Samba DCs. However, if you're joining the first Samba DC into a Windows based AD, you should read the [[Setup_a_Samba_Active_Directory_Domain_Controller|Setup a Samba Active Directory Domain Controller]] documentation before you continue. It contains some basic information about the environment, command explanation, etc. not repeated here.


'''See the [[Host_information_used_in_documentation|host information used in documentation]] page for used paths, hostnames, etc.'''






= Preparing the Installation =


For details, see [[Setting_up_Samba_as_an_Active_Directory_Domain_Controller#Preparing_the_Installation|Preparing the Installation]] in the [[Setting_up_Samba_as_an_Active_Directory_Domain_Controller|Setting up Samba as an Active Directory Domain Controller]] documentation.


= Preconditions =


* Make sure that your future DC uses a static IP address. Using one set by DHCP can cause trouble, if the address changes.


* Check your /etc/hosts for a correct resolution of the hostname to its IP:
127.0.0.1 localhost.localdomain localhost
10.99.0.2 DC2.samdom.example.com DC2
: Ensure that your DC hostname resolves to its LAN IP and not to 127.0.0.1!


* Remove any previous existing installation of Samba on the host.


= Installing Samba =
* If your AD forest is Windows driven, further checks are required:
:The following commands can be run from any Windows domain computer.


For details, see [[Installing_Samba|Installing Samba]].
:* Check the Forest functional level:


{{Imbox
> dsquery * "CN=Partitions,CN=Configuration,DC=samdom,DC=example,DC=com" -scope base -attr msDS-Behavior-Version
| type = note
msDS-Behavior-Version
| text = Install a maintained Samba version. For details, see [[Samba_Release_Planning|Samba Release Planning]].
4
}}


:: Minimum suported level: 2003 native (level 2)
:: Maximum suported level: 2008 R2 (level 4)


:* Check the directory schema version:


> dsquery * "CN=Schema,CN=Configuration,DC=samdom,DC=example,DC=com" -Scope Base -attr objectVersion
objectVersion
69


::Samba <= 4.4.x: The maximum Forest schema supported is: 47 (Server 2008 R2)
::Samba >= 4.5.x: The maximum Forest schema supported is: 69 (Server 2012 R2)


= Preparing the Host for Joining the Domain =




= Installation =

Before you start, check the [[Operating system requirements|Operating System requirements]] for dependencies.

You have the following options to install Samba:

* [[Build_Samba_from_Source|Build Samba]] yourself

* Install [[Distribution_specific_package_installation|distribution specific packages]]
: Make sure that you use a recent version of Samba, noting that not all distributions currently ship Samba packages with Active Directory Domain Controller capabilities. One reason is that some distributions are based on MIT Kerberos, while Samba (currently) only supports Heimdal Kerberos. E. g. Red Hat operating systems (RHEL, CentOS, Fedora, etc.) are affected. In this case, choose one of the other install options.

* Install SerNet [http://www.samba.plus Samba+]/[http://www.samba.plus/older-packages/ Enterprise] packages



== Paths ==

You should consider putting the directories "/usr/local/samba/bin/" and "/usr/local/samba/sbin/" at the beginning of your $PATH variable:

export PATH=/usr/local/samba/bin/:/usr/local/samba/sbin/:$PATH

To permanently add this to your system or user configuration, see your distributions documentation.





= Preparing the host for the domain join =


== Local DNS server ==
== Local DNS server ==


By default, the first Domain Controller in a domain automatically acts as a DNS server for AD based zones. For failover reasons, it is recommended to have at least two DC's providing AD DNS services. If you plan to use BIND as the DNS backend on the new Domain Controller, you have to [[Configure_BIND_as_backend_for_Samba_AD|configure BIND as backend for Samba AD]] before you start your DC the first time. It's a good idea to finish this task now. If you decided to run the internal or no DNS server on this host, no further steps are required.
By default, the first Domain Controller (DC) in a forest runs a DNS server for Active Directory (AD)-based zones. For failover reasons it is recommended to run multiple DCs acting as a DNS server in a network. If you consider providing a DNS service on the new DC:


* For the <code>BIND9_DLZ</code> back end, see [[BIND9_DLZ_DNS_Back_End|BIND9_DLZ DNS Back End]]. Finish this task before you start the Samba DC service.
* For the internal DNS no further actions are required.




== DNS resolving ==

Many things in an Active Directory, not only the join process, rely on DNS. Therefore it is required that the new host is able to resolve AD DNS zones. To accomplish this, we use a DNS server on one of your existing Domain Controllers.

On Linux and Unixes, you usually configure DNS settings in /etc/resolv.conf:

nameserver 10.99.0.1
search samdom.example.com

Some tools like NetworkManager may overwrite manual changes in that file. Please consult your distributions documentation for configuring name resolution.


== Configuring DNS ==
To verify a correct name resolution, try resolving the hostname of one of your existing Domain Controllers:


For details, see [[Linux_and_Unix_DNS_Configuration|Linux and Unix DNS Configuration]].
# host -t A DC1.samdom.example.com
DC1.samdom.example.com has address 10.99.0.1




Line 104: Line 52:
== Kerberos ==
== Kerberos ==


Set the following settings in your Kerberos client configuration file <code>/etc/krb5.conf</code>:
Kerberos, which is also a very important part in an AD, needs to be configured next. Add the following content to /etc/krb5.conf:


[libdefaults]
[libdefaults]
Line 111: Line 59:
default_realm = SAMDOM.EXAMPLE.COM
default_realm = SAMDOM.EXAMPLE.COM


To verify the correct setup, use "kinit" to obtain a Kerberos ticket:
To verify the settings use the <code>kinit</code> command to request a Kerberos ticket for the domain administrator:


# kinit administrator
# kinit administrator
Password for administrator@SAMDOM.EXAMPLE.COM:
Password for administrator@SAMDOM.EXAMPLE.COM:


To list Kerberos tickets:
Depending on your distribution, "kinit" may just return you to a prompt when successful. To verify that you had received a Kerberos ticket, run: "klist -e"


# klist
Ticket cache: FILE:/tmp/krb5cc_0
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: administrator@SAMDOM.EXAMPLE.COM
Default principal: administrator@SAMDOM.EXAMPLE.COM
Line 129: Line 78:




= Join the existing domain as a Domain Controller =
= Joining the Active Directory as a Domain Controller =


To join the domain <code>samdom.example.com</code> as a domain controller (DC) that additionally acts as a DNS server using the Samba internal DNS:
Before you start, make yourself familiar with the possible parameters and options of the join process:


# samba-tool domain join --help
# samba-tool domain join samdom.example.com DC -U"SAMDOM\administrator" --dns-backend=SAMBA_INTERNAL


If your new Domain Controller has multiple network interfaces, the following two "samba-tool" options are required to prevent it auto-choosing one of the IPv4/IPv6 addresses of the interfaces. Furthermore it is necessary to bind Samba to the desired interface.

# samba-tool domain join ..... --option="interfaces=lo eth0" --option="bind interfaces only=yes"


Join the existing domain (parameter explanation below):

# samba-tool domain join samdom.example.com DC -Uadministrator --realm=SAMDOM.EXAMPLE.COM --dns-backend=SAMBA_INTERNAL
Finding a writeable DC for domain 'samdom.example.com'
Finding a writeable DC for domain 'samdom.example.com'
Found DC dc1.samdom.example.com
Found DC dc1.samdom.example.com
Password for [WORKGROUP\administrator]:
Password for [SAMDOM\administrator]:
workgroup is SAMDOM
workgroup is SAMDOM
realm is samdom.example.com
realm is samdom.example.com
checking sAMAccountName
Adding CN=DC2,OU=Domain Controllers,DC=samdom,DC=example,DC=com
Adding CN=DC2,OU=Domain Controllers,DC=samdom,DC=example,DC=com
Adding CN=DC2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
Adding CN=DC2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
Line 181: Line 119:
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1206/1618] linked_values[0/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1206/1618] linked_values[0/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1608/1618] linked_values[0/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1608/1618] linked_values[0/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1618/1618] linked_values[38/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1618/1618] linked_values[42/0]
Replicating critical objects from the base DN of the domain
Replicating critical objects from the base DN of the domain
Partition[DC=samdom,DC=example,DC=com] objects[100/100] linked_values[23/0]
Partition[DC=samdom,DC=example,DC=com] objects[100/100] linked_values[23/0]
Partition[DC=samdom,DC=example,DC=com] objects[387/287] linked_values[23/0]
Partition[DC=samdom,DC=example,DC=com] objects[386/286] linked_values[23/0]
Done with always replicated NC (base, config, schema)
Done with always replicated NC (base, config, schema)
Replicating DC=DomainDnsZones,DC=samdom,DC=example,DC=com
Replicating DC=DomainDnsZones,DC=samdom,DC=example,DC=com
Partition[DC=DomainDnsZones,DC=samdom,DC=example,DC=com] objects[41/41] linked_values[0/0]
Partition[DC=DomainDnsZones,DC=samdom,DC=example,DC=com] objects[44/44] linked_values[0/0]
Replicating DC=ForestDnsZones,DC=samdom,DC=example,DC=com
Replicating DC=ForestDnsZones,DC=samdom,DC=example,DC=com
Partition[DC=ForestDnsZones,DC=samdom,DC=example,DC=com] objects[19/19] linked_values[0/0]
Partition[DC=ForestDnsZones,DC=samdom,DC=example,DC=com] objects[19/19] linked_values[0/0]
Line 196: Line 134:
Joined domain SAMDOM (SID S-1-5-21-469703510-2364959079-1506205053) as a DC
Joined domain SAMDOM (SID S-1-5-21-469703510-2364959079-1506205053) as a DC


See the <code>samba-tool domain join --help</code> command's output for further information.


Other parameters frequently used with the <code>samba-tool domain join</code> command:


* <code>--site=SITE</code>: Directly join the host as DC to a specific [[Active_Directory_Sites|Active Directory Site]].
<u>Parameter explanations:</u>


* <code>--option="interfaces=lo eth0" --option="bind interfaces only=yes"</code>: If your server has multiple network interfaces, use these options to bind Samba to the specified interfaces. This enables the <code>samba-tool</code> command to register the correct LAN IP address in the directory during the join.
* <u>Domain:</u> AD Domain Name


{{Imbox
* <u>Server Role:</u> "DC" for Domain Controller
| type = note
| text = If the other DCs are Samba DCs and were provisioned with <code>--use-rfc2307</code>, you Should add <code>--option='idmap_ldb:use rfc2307 = yes'</code> to the join command
}}


* <u>Username:</u> Account that is allowed to join new Domain Controllers. Typically it is at least the Domain Administrator.


* <u>Realm:</u> Kerberos Realm written in upper case.


* <u>DNS backend:</u> Supported DNS backends are the [[Samba_Internal_DNS|Samba internal DNS server]] and [[Configure_BIND_as_backend_for_Samba_AD|BIND9_DLZ]]. We used the default - the internal DNS - in our above example. Even though it's the default, we used this parameter to show users how to set a different DNS backend. The internal DNS is the best choice if you do not have complex DNS requirements. See [[DNS#Which_DNS_backend_should_I_choose.3F|Which DNS backend should I choose?]] for a comparison and suggestions. If you choose BIND9_DLZ as the backend, you must setup and configure BIND before first starting your Domain Controller. See [[Configure_BIND_as_backend_for_Samba_AD|Configure BIND as backend for Samba AD]] for further setup information. If you later find out that your DNS backend choice doesn't fit your needs, you can [[Changing_the_DNS_backend|change it afterwards]]. Do not use BIND9_FLATFILE as the DNS backend. It isn't documented and is not supported! Given that this is at least your second DC in your AD forest, you can also choose NONE here. However, for failover reasons it is recommended to have at least two AD DNS servers in your network.


* <u>Site:</u> If you have setup [[Active_Directory_Sites|Active Directory Sites]], it's possible to join a new DC directly into a specified AD site by using the "--site=SITE" parameter.


= Verifying the DNS Entries =


If you join a Samba DC that runs Samba 4.7 and later, <code>samba-tool</code> created all required DNS entries automatically. To manually create the records on an earlier version, see [[Verifying_and_Creating_a_DC_DNS_Record|Verifying and Creating a DC DNS Record]].






= Check DNS entries =


'''This is a very important step, so don't skip it!'''


= Configuring the BIND9_DLZ DNS Back End =
For a working replication, it is required that all DC related DNS records were added to the DNS zones during the join. [[Check_and_fix_DNS_entries_on_DC_joins|Check, if they are existing]] and if not ([https://bugzilla.samba.org/show_bug.cgi?id=10928 Bug #10928]), [[Check_and_fix_DNS_entries_on_DC_joins|add them manually]].


If you selected the <code>BIND9_DLZ</code> DNS back end during the domain join, set up the BIND configuration. For details, see [[BIND9_DLZ_DNS_Back_End|BIND9_DLZ DNS Back End]].








= Adaptations for the BIND DNS backend =


= Built-in User & Group ID Mappings =
Skip this step, if you're not using BIND as DNS backend


Sysvol replication is currently not supported on Samba. To use a [[SysVol_replication_(DFS-R)|Sysvol Replication]] workaround, all domain controllers (DC) must use the same ID mappings for built-in users and groups.


By default, a Samba DC stores the user & group IDs in 'xidNumber' attributes in 'idmap.ldb'. Because of the way 'idmap.ldb' works, you cannot guarantee that each DC will use the same ID for a given user or group. To ensure that you do use the same IDs, you must:


* Create a hot-backup of the <code>/usr/local/samba/private/idmap.ldb</code> file on the existing DC:
== Workaround: Fix keytab permissions ==


# tdbbackup -s .bak /usr/local/samba/private/idmap.ldb
This fix is only required, if joining the domain with a Samba version prior to 4.4. Wrong keytab permissions will prevent BIND updating your AD DNS zones. One of the results will be that "samba_dnsupdate" can't add important DNS entries, that clients query to locate the new Domain Controller!


: This creates a backup file <code>/usr/local/samba/private/idmap.ldb.bak</code>.
Fix permissions on the "dns.keytab" file, to allow BIND to read this file:


* Move the backup file to the <code>/usr/local/samba/private/</code> folder on the new joined DC and remove the <code>.bak</code> suffix to replace the existing file.
# chmod 640 /usr/local/samba/private/dns.keytab
# chgrp named /usr/local/samba/private/dns.keytab


* Reset the Sysvol folder's file system access control lists (ACL) on the new DC:
''Note: If you use Samba packages, make sure that the account BIND uses, is able to access the dns.keytab file. Some package installations set too restrictive permissions on higher folders.''


# samba-tool ntacl sysvolreset




== Enable the correct BIND9_DLZ module ==


Samba is shipped with BIND9_DLZ modules for different BIND versions. You have to enable the right one in /usr/local/samba/private/named.conf (uncomment the right one and comment the others):


dlz "AD DNS Zone" {
# For BIND 9.8.0
database "dlopen /usr/local/samba/lib/bind9/dlz_bind9.so";
# For BIND 9.9.0
# database "dlopen /usr/local/samba/lib/bind9/dlz_bind9_9.so";
# For BIND 9.10.0
# database "dlopen /usr/local/samba/lib/bind9/dlz_bind9_10.so";
};


= Starting the Samba Service =
The example above enables the module for BIND 9.8.x (default).


To start the <code>samba</code> Samba Active Directory (AD) domain controller (DC) service manually, enter:


# samba


Samba does not provide System V init scripts, <code>systemd</code>, <code>upstart</code>, or other services configuration files.
* If you installed Samba using packages, use the script or service configuration file included in the package to start Samba.
* If you built Samba, see [[Managing_the_Samba_AD_DC_Service|Managing the Samba AD DC Service]].




= GID mappings of built-in groups =


If you are using a version of Samba before 4.2.0, or are using the builtin winbind instead of the separate winbindd, there are issues with GID mappings of built-in groups. The GIDs of groups owning files and directories in the SYSVOL folder may differ between Domain Controllers, as Samba doesn't replicate these GIDs!
From Samba version 4.2.0, the separate winbindd daemon is used instead of the built-in winbind and this is able to display the built-in group names instead of just the GID number.


If you are using a Samba version before 4.2.0 or are using the built-in winbind, you will need to use the following workaround:


= Verifying Directory Replication =
'''NOTE: Only do this if you are running a version of Samba before 4.2.0 or are using the built-in winbind.'''


After the domain controller (DC) has been started, the knowledge consistency checker (KCC) on the Samba DC creates replication agreements to other DCs in the Active Directory (AD) forest. It can take up to 15 minutes until the KCC creates the auto-generated replication connections.
* Create a hot-backup of "idmap.ldb" on one of your other Samba Domain Controllers:


For details about how to verify that the directory replication works correctly, see [[Verifying the Directory Replication Statuses]].
# tdbbackup -s .bak /usr/local/samba/private/idmap.ldb


{{Imbox
* Move the created backup file "/usr/local/samba/private/idmap.ldb.bak" to "/usr/local/samba/private/" on the new joined Domain Controller and remove the .bak suffix, to replace the existing file.
| type = note
| text = To optimize replication latency and cost, the KCC in Samba 4.5 and later no longer creates a fully-meshed replication topology between all DCs. For further details, see [[The Samba KCC]].
}}


* Reset the ACLs on the local SYSVOL folder of the new joined Domain Controller:


# samba-tool ntacl sysvolreset






= Starting BIND =


Before you start the BIND daemon, verify that the DNS directory partitions have been successfully replicated:

= Start Samba =

To start the Samba Active Directory Domain Controller in "standard" mode, which is suitable for production use, run

# samba

Samba doesn't yet have init scripts included. You can find examples on the [[Samba4/InitScript|Samba Init-Script]] page.





= Directory replication =

A few minutes after you have started Samba, connections with other DCs will be established automatically.


# samba-tool drs showrepl
# samba-tool drs showrepl
...
Default-First-Site-Name\DC2
DSA Options: 0x00000001
DSA object GUID: c14a774f-9732-4ec2-b9fa-2156c95c4e48
DSA invocationId: 7bdb135c-6868-4dd9-9460-33dea4b6b87b
==== INBOUND NEIGHBORS ====
==== INBOUND NEIGHBORS ====
...
CN=Schema,CN=Configuration,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ Thu Sep 24 20:08:46 2015 CEST was successful
0 consecutive failure(s).
Last success @ Thu Sep 24 20:08:46 2015 CEST
DC=DomainDnsZones,DC=samdom,DC=example,DC=com
DC=DomainDnsZones,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
Default-First-Site-Name\DC1 via RPC
Line 326: Line 232:
0 consecutive failure(s).
0 consecutive failure(s).
Last success @ Thu Sep 24 20:08:45 2015 CEST
Last success @ Thu Sep 24 20:08:45 2015 CEST
...
CN=Configuration,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ Thu Sep 24 20:08:46 2015 CEST was successful
0 consecutive failure(s).
Last success @ Thu Sep 24 20:08:46 2015 CEST
DC=ForestDnsZones,DC=samdom,DC=example,DC=com
DC=ForestDnsZones,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
Default-First-Site-Name\DC1 via RPC
Line 340: Line 239:
0 consecutive failure(s).
0 consecutive failure(s).
Last success @ Thu Sep 24 20:08:45 2015 CEST
Last success @ Thu Sep 24 20:08:45 2015 CEST
DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ Thu Sep 24 20:08:45 2015 CEST was successful
0 consecutive failure(s).
Last success @ Thu Sep 24 20:08:45 2015 CEST
==== OUTBOUND NEIGHBORS ====
CN=Schema,CN=Configuration,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ NTTIME(0) was successful
0 consecutive failure(s).
Last success @ NTTIME(0)
DC=DomainDnsZones,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ NTTIME(0) was successful
0 consecutive failure(s).
Last success @ NTTIME(0)
CN=Configuration,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ NTTIME(0) was successful
0 consecutive failure(s).
Last success @ NTTIME(0)
DC=ForestDnsZones,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ NTTIME(0) was successful
0 consecutive failure(s).
Last success @ NTTIME(0)
DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ NTTIME(0) was successful
0 consecutive failure(s).
Last success @ NTTIME(0)
==== KCC CONNECTION OBJECTS ====
Connection --
Connection name: fb03f58b-1654-4a02-8e11-f0ea120b60cc
Enabled : TRUE
Server DNS name : DC1.samdom.example.com
Server DN name : CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
TransportType: RPC
options: 0x00000001
Warning: No NC replicated for Connection!


If the replication works correctly, start the BIND service. See your distribution's documentation for information how to start a service.
'''Depending on your replication settings it may take a few minutes until all connections are established. So please be patient!''' On the long shot that the outbound connections aren't established automatically - not even after several minutes - you can force the replication (generally not necessary!). See [[Samba-tool_drs_replicate|samba-tool drs replicate]].


''Note: The message "Warning: No NC replicated for Connection!" can be safely ignored. See [[FAQ#Message:_Warning:_No_NC_replicated_for_Connection.21|FAQ: Message: Warning: No NC replicated for Connection!]]''








= Testing your Samba AD DC =


== Verifying the File Server ==
= Start BIND =

Skip this step if not using BIND9_DLZ as DNS backend.

Check that the DNS partitions are already replicated:

# samba-tool drs showrepl
...
==== INBOUND NEIGHBORS ====
...
DC=DomainDnsZones,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ Thu Sep 24 20:08:45 2015 CEST was successful
0 consecutive failure(s).
Last success @ Thu Sep 24 20:08:45 2015 CEST
...
DC=ForestDnsZones,DC=samdom,DC=example,DC=com
Default-First-Site-Name\DC1 via RPC
DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
Last attempt @ Thu Sep 24 20:08:45 2015 CEST was successful
0 consecutive failure(s).
Last success @ Thu Sep 24 20:08:45 2015 CEST

If replication is working, start BIND.



For details, see [[Setting_up_Samba_as_an_Active_Directory_Domain_Controller#Verifying_the_File_Server|Verifying the File Server]] in the [[Setting_up_Samba_as_an_Active_Directory_Domain_Controller|Setting up Samba as an Active Directory Domain Controller]] documentation.






= Testing the local DNS =
== Testing the Local DNS Server ==


Skip this step, if you have choosen "NONE" as DNS backend during the join.
Skip this step if you selected <code>--dns-backend=NONE</code> during the join.


To test that the local DNS is working properly, run the following commands on the new DC, to query the local DNS
Query the local DNS server to resolve the domain name <code>samdom.example.com</code>:


$ host -t A dc1.samdom.example.com localhost
# host -t A samdom.example.com localhost
Using domain server:
Using domain server:
Name: localhost
Name: localhost
Line 446: Line 266:
Aliases:
Aliases:
dc1.samdom.example.com has address 10.99.0.1
samdom.example.com has address 10.99.0.1
samdom.example.com has address 10.99.0.2


The local DNS resolves the domain name to the IP addresses of all domain controllers (DC).
If you receive any errors, check your system logs to locate the problem.


In case you receive no or a different result, review this documentation and check:
* the system log files,
* the Samba log files,
* the BIND log files, if the <code>BIND9_DLZ</code> is used.






== Verifying Kerberos ==


For details, see [[Setting_up_Samba_as_an_Active_Directory_Domain_Controller#Verifying_Kerberos|Verifying Kerberos]] in the [[Setting_up_Samba_as_an_Active_Directory_Domain_Controller|Setting up Samba as an Active Directory Domain Controller]] documentation.
= Best practice: DNS configuration on DCs =


It is not just on Workstations that you should configure at least two AD DNS servers. On Domain Controllers it is even more important, because if just one DNS is configured and that one fails, services relying on DNS, such as directory replication, will also fail!


A best practice for DNS configuration on DCs is, that you don't define the IP of the local DNS as the first nameserver. This could lead into problems like [http://retrohack.com/a-word-or-two-about-dns-islanding DNS islanding].


Example configuration:


<u>/etc/resolv.conf on DC1:</u>
nameserver 10.99.0.2 # IP of the other DC as first entry
nameserver 10.99.0.1 # IP of this DC as second entry
search samdom.example.com


= DNS Configuration on Domain Controllers =
<u>/etc/resolv.conf on DC2:</u>

nameserver 10.99.0.1 # IP of the other DC as first entry
The DNS configuration on domain controllers (DC) is important, because if it is unable to locate other DCs the replication will fail. The following is a best practice for DNS configuration on domain controllers (DC):
nameserver 10.99.0.2 # IP of this DC as second entry

Set the local IP of a DC as secondary or tertiary <code>nameserver</code> entry in its <code>/etc/resolv.conf</code> file and use a different Active Directory (AD) DNS server IP from the forest as primary name server. For example:

On the new joined DC, use the <code>10.99.0.1</code> IP of the existing DC as primary and the local <code>10.99.0.2</code> IP as secondary <code>nameserver</code> entry:

nameserver 10.99.0.1
nameserver 10.99.0.2 # IP of the new joined DC as secondary entry
search samdom.example.com
search samdom.example.com


If you have more than two DCs, you can configure the nameserver IPs in crosswise direction. However you shouldn't set the local DNS as first entry!
If you are running more than two DCs, you can configure the IPs in crosswise direction.




Line 478: Line 304:




= Configuring Time Synchronisation =
= SYSVOL replication =


Kerberos requires a synchronised time on all domain members. For further details and how to set up the <code>ntpd</code> service, see [[Time_Synchronisation|Time Synchronisation]].
At the current stage of Samba, SYSVOL replication isn't implemented. Until it is, if you make any changes on that share, you will have to keep them in sync on all your Domain Controllers. An example of how to achieve this in an easy and automated way between Samba DCs, can be found in the [[Rsync_based_SysVol_replication_workaround|Rsync based SYSVOL replication workaround ]] documentation. For a workaround with a Windows DC, see [[Robocopy_based_SysVol_replication_workaround|Robocopy based SysVol replication workaround]].


Some pages on the internet recommend using a distributed filesystem like GlusterFS, Lustre, etc. to automatically mirror the content of the SYSVOL share. '''The Samba team strongly advises not to do this, because a cluster file system, used with Samba, requires a [[CTDB_Setup|CTDB setup]], that is <u>not compatible</u> with the Samba Active Directory Domain Controller!'''








= Configuring Winbindd on a Samba AD DC =


''Optional''. For details, see [[Configuring_Winbindd_on_a_Samba_AD_DC|Configuring Winbindd on a Samba AD DC]].
= Testing directory replication =


To check that replication is working correctly between your Domain Controllers, try adding/modifying e. g. a user on one DC using either the Samba command line tools (samba-tool, ldbedit) or the Windows GUI admin tools. Then check that the changes shows up within a few seconds on the new Domain Controller.






== ldapcmp ==


= Using the Domain Controller as a File Server =
An alternative to compare two directories is [[Samba-tool_ldapcmp|samba-tool ldapcmp]].

For details, see [[Setting_up_Samba_as_an_Active_Directory_Domain_Controller#Using_the_Domain_Controller_as_a_File_Server|Using the Domain Controller as a File Server]].





= Sysvol Replication =

Samba currently does not support Sysvol replication. For unsupported workarounds, see [[SysVol_replication_(DFS-R)|Sysvol Replication]].

{{Imbox
| type = note
| text = If there are more than the default GPOs in Sysvol on the other DC(s), you must sync Sysvol to the new DC, <code>samba-tool ntacl sysvolreset</code> will throw an error if you do not.
}}





= Testing the Directory Replication =

To test that the directory replication works correctly, add for example a user on an existing DC and verify that it shows up automatically on the newly joined DC.

Optionally use the <code>ldapcmp</code> utility to compare two directories. For details, see [[Samba-tool_ldapcmp|samba-tool ldapcmp]].




Line 504: Line 353:
= Troubleshooting =
= Troubleshooting =


If you encounter any problems when using this documentation, see the [[Samba_AD_DC_Troubleshooting|Samba AD DC Troubleshooting]] page.
For further details, see [[Samba_AD_DC_Troubleshooting|Samba AD DC Troubleshooting]].





----
[[Category:Active Directory]]
[[Category:Domain Control]]

Revision as of 19:52, 11 January 2018

Introduction

Running one domain controller (DC) is sufficient for a working Active Directory (AD) forest. However, for failover and load balancing reasons, you should add further DCs to your AD forest. Joining an additional Samba DC to an existing AD differs from provisioning the first DC in a forest. If you set up a new AD forest, see Setting up Samba as an Active Directory Domain Controller.



Preparing the Installation

For details, see Preparing the Installation in the Setting up Samba as an Active Directory Domain Controller documentation.



Installing Samba

For details, see Installing Samba.



Preparing the Host for Joining the Domain

Local DNS server

By default, the first Domain Controller (DC) in a forest runs a DNS server for Active Directory (AD)-based zones. For failover reasons it is recommended to run multiple DCs acting as a DNS server in a network. If you consider providing a DNS service on the new DC:

  • For the BIND9_DLZ back end, see BIND9_DLZ DNS Back End. Finish this task before you start the Samba DC service.
  • For the internal DNS no further actions are required.


Configuring DNS

For details, see Linux and Unix DNS Configuration.


Kerberos

Set the following settings in your Kerberos client configuration file /etc/krb5.conf:

[libdefaults]
    dns_lookup_realm = false
    dns_lookup_kdc = true
    default_realm = SAMDOM.EXAMPLE.COM

To verify the settings use the kinit command to request a Kerberos ticket for the domain administrator:

# kinit administrator
Password for administrator@SAMDOM.EXAMPLE.COM:

To list Kerberos tickets:

# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: administrator@SAMDOM.EXAMPLE.COM

Valid starting       Expires              Service principal
24.09.2015 19:56:55  25.09.2015 05:56:55  krbtgt/SAMDOM.EXAMPLE.COM@SAMDOM.EXAMPLE.COM
	renew until 25.09.2015 19:56:53



Joining the Active Directory as a Domain Controller

To join the domain samdom.example.com as a domain controller (DC) that additionally acts as a DNS server using the Samba internal DNS:

# samba-tool domain join samdom.example.com DC -U"SAMDOM\administrator" --dns-backend=SAMBA_INTERNAL
Finding a writeable DC for domain 'samdom.example.com'
Found DC dc1.samdom.example.com
Password for [SAMDOM\administrator]:
workgroup is SAMDOM
realm is samdom.example.com
Adding CN=DC2,OU=Domain Controllers,DC=samdom,DC=example,DC=com
Adding CN=DC2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
Adding CN=NTDS Settings,CN=DC2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com
Adding SPNs to CN=DC2,OU=Domain Controllers,DC=samdom,DC=example,DC=com
Setting account password for DC2$
Enabling account
Calling bare provision
Looking up IPv4 addresses
Looking up IPv6 addresses
No IPv6 address will be assigned
Setting up share.ldb
Setting up secrets.ldb
Setting up the registry
Setting up the privileges database
Setting up idmap db
Setting up SAM db
Setting up sam.ldb partitions and settings
Setting up sam.ldb rootDSE
Pre-loading the Samba 4 and AD schema
A Kerberos configuration suitable for Samba 4 has been generated at /usr/local/samba/private/krb5.conf
Provision OK for domain DN DC=samdom,DC=example,DC=com
Starting replication
Schema-DN[CN=Schema,CN=Configuration,DC=samdom,DC=example,DC=com] objects[402/1550] linked_values[0/0]
Schema-DN[CN=Schema,CN=Configuration,DC=samdom,DC=example,DC=com] objects[804/1550] linked_values[0/0]
Schema-DN[CN=Schema,CN=Configuration,DC=samdom,DC=example,DC=com] objects[1206/1550] linked_values[0/0]
Schema-DN[CN=Schema,CN=Configuration,DC=samdom,DC=example,DC=com] objects[1550/1550] linked_values[0/0]
Analyze and apply schema objects
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[402/1618] linked_values[0/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[804/1618] linked_values[0/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1206/1618] linked_values[0/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1608/1618] linked_values[0/0]
Partition[CN=Configuration,DC=samdom,DC=example,DC=com] objects[1618/1618] linked_values[42/0]
Replicating critical objects from the base DN of the domain
Partition[DC=samdom,DC=example,DC=com] objects[100/100] linked_values[23/0]
Partition[DC=samdom,DC=example,DC=com] objects[386/286] linked_values[23/0]
Done with always replicated NC (base, config, schema)
Replicating DC=DomainDnsZones,DC=samdom,DC=example,DC=com
Partition[DC=DomainDnsZones,DC=samdom,DC=example,DC=com] objects[44/44] linked_values[0/0]
Replicating DC=ForestDnsZones,DC=samdom,DC=example,DC=com
Partition[DC=ForestDnsZones,DC=samdom,DC=example,DC=com] objects[19/19] linked_values[0/0]
Committing SAM database
Sending DsReplicaUpdateRefs for all the replicated partitions
Setting isSynchronized and dsServiceName
Setting up secrets database
Joined domain SAMDOM (SID S-1-5-21-469703510-2364959079-1506205053) as a DC

See the samba-tool domain join --help command's output for further information.

Other parameters frequently used with the samba-tool domain join command:

  • --option="interfaces=lo eth0" --option="bind interfaces only=yes": If your server has multiple network interfaces, use these options to bind Samba to the specified interfaces. This enables the samba-tool command to register the correct LAN IP address in the directory during the join.



Verifying the DNS Entries

If you join a Samba DC that runs Samba 4.7 and later, samba-tool created all required DNS entries automatically. To manually create the records on an earlier version, see Verifying and Creating a DC DNS Record.



Configuring the BIND9_DLZ DNS Back End

If you selected the BIND9_DLZ DNS back end during the domain join, set up the BIND configuration. For details, see BIND9_DLZ DNS Back End.



Built-in User & Group ID Mappings

Sysvol replication is currently not supported on Samba. To use a Sysvol Replication workaround, all domain controllers (DC) must use the same ID mappings for built-in users and groups.

By default, a Samba DC stores the user & group IDs in 'xidNumber' attributes in 'idmap.ldb'. Because of the way 'idmap.ldb' works, you cannot guarantee that each DC will use the same ID for a given user or group. To ensure that you do use the same IDs, you must:

  • Create a hot-backup of the /usr/local/samba/private/idmap.ldb file on the existing DC:
# tdbbackup -s .bak /usr/local/samba/private/idmap.ldb
This creates a backup file /usr/local/samba/private/idmap.ldb.bak.
  • Move the backup file to the /usr/local/samba/private/ folder on the new joined DC and remove the .bak suffix to replace the existing file.
  • Reset the Sysvol folder's file system access control lists (ACL) on the new DC:
# samba-tool ntacl sysvolreset



Starting the Samba Service

To start the samba Samba Active Directory (AD) domain controller (DC) service manually, enter:

# samba

Samba does not provide System V init scripts, systemd, upstart, or other services configuration files.

  • If you installed Samba using packages, use the script or service configuration file included in the package to start Samba.
  • If you built Samba, see Managing the Samba AD DC Service.



Verifying Directory Replication

After the domain controller (DC) has been started, the knowledge consistency checker (KCC) on the Samba DC creates replication agreements to other DCs in the Active Directory (AD) forest. It can take up to 15 minutes until the KCC creates the auto-generated replication connections.

For details about how to verify that the directory replication works correctly, see Verifying the Directory Replication Statuses.



Starting BIND

Before you start the BIND daemon, verify that the DNS directory partitions have been successfully replicated:

# samba-tool drs showrepl
...
==== INBOUND NEIGHBORS ====
...
DC=DomainDnsZones,DC=samdom,DC=example,DC=com
	Default-First-Site-Name\DC1 via RPC
		DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
		Last attempt @ Thu Sep 24 20:08:45 2015 CEST was successful
		0 consecutive failure(s).
		Last success @ Thu Sep 24 20:08:45 2015 CEST
...
DC=ForestDnsZones,DC=samdom,DC=example,DC=com
	Default-First-Site-Name\DC1 via RPC
		DSA object GUID: 4a6bd92a-6612-4b15-aa8c-9ec371e8994f
		Last attempt @ Thu Sep 24 20:08:45 2015 CEST was successful
		0 consecutive failure(s).
		Last success @ Thu Sep 24 20:08:45 2015 CEST

If the replication works correctly, start the BIND service. See your distribution's documentation for information how to start a service.



Testing your Samba AD DC

Verifying the File Server

For details, see Verifying the File Server in the Setting up Samba as an Active Directory Domain Controller documentation.


Testing the Local DNS Server

Skip this step if you selected --dns-backend=NONE during the join.

Query the local DNS server to resolve the domain name samdom.example.com:

# host -t A samdom.example.com localhost
Using domain server:
Name: localhost
Address: 127.0.0.1#53
Aliases:

samdom.example.com has address 10.99.0.1
samdom.example.com has address 10.99.0.2

The local DNS resolves the domain name to the IP addresses of all domain controllers (DC).

In case you receive no or a different result, review this documentation and check:

  • the system log files,
  • the Samba log files,
  • the BIND log files, if the BIND9_DLZ is used.


Verifying Kerberos

For details, see Verifying Kerberos in the Setting up Samba as an Active Directory Domain Controller documentation.



DNS Configuration on Domain Controllers

The DNS configuration on domain controllers (DC) is important, because if it is unable to locate other DCs the replication will fail. The following is a best practice for DNS configuration on domain controllers (DC):

Set the local IP of a DC as secondary or tertiary nameserver entry in its /etc/resolv.conf file and use a different Active Directory (AD) DNS server IP from the forest as primary name server. For example:

On the new joined DC, use the 10.99.0.1 IP of the existing DC as primary and the local 10.99.0.2 IP as secondary nameserver entry:

nameserver 10.99.0.1
nameserver 10.99.0.2       # IP of the new joined DC as secondary entry
search samdom.example.com

If you are running more than two DCs, you can configure the IPs in crosswise direction.



Configuring Time Synchronisation

Kerberos requires a synchronised time on all domain members. For further details and how to set up the ntpd service, see Time Synchronisation.



Configuring Winbindd on a Samba AD DC

Optional. For details, see Configuring Winbindd on a Samba AD DC.



Using the Domain Controller as a File Server

For details, see Using the Domain Controller as a File Server.



Sysvol Replication

Samba currently does not support Sysvol replication. For unsupported workarounds, see Sysvol Replication.



Testing the Directory Replication

To test that the directory replication works correctly, add for example a user on an existing DC and verify that it shows up automatically on the newly joined DC.

Optionally use the ldapcmp utility to compare two directories. For details, see samba-tool ldapcmp.



Troubleshooting

For further details, see Samba AD DC Troubleshooting.