Difference between revisions of "GlusterFS"

From SambaWiki
Line 153: Line 153:
root@cluster-02:~# gluster peer status
root@cluster-02:~# gluster peer status
Number of Peers: 1
Number of Peers: 1
Other names:
Hostname: c-01.heartbeat.net
Hostname: c-01.heartbeat.net
Uuid: adafbf93-e716-4d99-bf89-e8044d57e3aa
Uuid: adafbf93-e716-4d99-bf89-e8044d57e3aa

Revision as of 18:24, 21 February 2020


GlusterFS is a free and open source scalable filesystem it can be used for cloud storage or to store data in a local network. It can be used to set up an active-active filesystem cluster with failover and loadbalancing via DNS-round robin. Together with CTDB it is possible to build a fileserver for a network with the following advantages:

  • Expandable without downtime
  • Mount Gluster volumes via the network
  • Posix ACL support
  • Different configurations possible (depending of your needs)
  • Self-healing
  • Support of snapshots if LVM2 thinly provisioned is used for the bricks

The different configurations available are:

  • Replicated Volume
  • Distributed Volume
  • Striped Volume
  • Replicated-Distributed Volume
  • Dispersed Volume

To read more about the different configurations see:

What you need

  • Two hosts with two network cards
  • An empty partition of 2GB to create the volume on each host
  • Two IP addresses from your production network
  • Two IP addresses for the heartbeat network
  • The GlusterFS packages version 7.x

Hostnames and IPs

Here you see two tables with the used IP-addresses on both hosts.

production network

If a client should connect to the Gluster-cluster an IP-address from the production network is used.

Hostname IP-address

Heartbeat network

The heartbeat network is only for the communication between the Gluster-nodes

Hostname IP-address

The mountpoints

you need two mountpoints, one for the physical brick and one for the volume.

Mountpoint What to mount
/gluster The brick on each node
/glusterfs For the volume on each node

Setting up the LVM-partition

The first step will be, setting up the replicated Gluster-Volume with two nodes. As an example a partition with 2GB is used.

root@cluster-01:~# fdisk /dev/sdc

root@cluster-01:~# apt install lvm2 thin-provisioning-tools

root@cluster-01:~# pvcreate /dev/sdc1
  Physical volume "/dev/sdc1" successfully created.

root@cluster-01:~# vgcreate glustergroup /dev/sdc1
  Volume group "glustergroup" successfully created

root@cluster-01:~# lvcreate -L 1950M -T glustergroup/glusterpool
  Using default stripesize 64,00 KiB
  Rounding up size to full physical extent 1,91 GiB
  Logical volume "glusterpool" created.

root@cluster-01:~# lvcreate -V 1900M -T glustergroup/glusterpool -n glusterv1
  Using default stripesize 64,00 KiB.
  Logical volume "glusterv1" created.
root@cluster-01:~# mkfs.xfs /dev/glustergroup/glusterv1

root@cluster-01:~# mkdir /gluster

root@cluster-01:~# mount /dev/glustergroup/glusterv1 /gluster

root@cluster-01:~# echo /dev/glustergroup/glusterv1 /gluster xfs defaults 0 0 >> /etc/fstab

root@cluster-01:~# mkdir /gluster/brick

Do all the steps on both nodes.

Creating the peer pool

Before you can create the volume you have to set up a peer pool, by adding the two hosts as peer to the pool In next listing you will see the commands to add the second gluster-node to the pool. You have to do this on the first of the first gluster-host:

root@cluster-01:~# gluster peer probe c-02
peer probe: success. 

If you try to add the peer and you get one of the following error messages:

root@cluster-01:~# gluster peer probe c-02
Connection failed. Please check if gluster daemon is operational.

root@cluster-01:~# gluster peer probe c-02
peer probe: failed: Probe returned with Transport endpoint is not connected

The first error message will point you to a not running glusterd on the host you are trying to add the peer. Restart the the daemon

systemctl restart glusterd

The second error message will point to a not running daemon on the peer you are trying to add to the pool. Restart the glusterd on the other node.

If you could add the node c-02 on the node c-01, add the host c-01 to the trusted pool on node c-02

root@cluster-02:~# gluster peer probe c-01
peer probe: success. 

Now you can check the status of each node and take a look at the list of all nodes with the gluster-command

root@cluster-01:~# gluster peer status
Number of Peers: 1

Hostname: c-02
Uuid: aca7d361-51df-4d1f-9b0f-4cf494029f21
State: Peer in Cluster (Connected) 
root@cluster-02:~# gluster peer status
Number of Peers: 1
Other names:

Hostname: c-01.heartbeat.net
Uuid: adafbf93-e716-4d99-bf89-e8044d57e3aa
State: Peer in Cluster (Connected)
Other names:
root@cluster-02:~# gluster pool list
UUID					Hostname          	State
adafbf93-e716-4d99-bf89-e8044d57e3aa	c-01.heartbeat.net Connected 
aca7d361-51df-4d1f-9b0f-4cf494029f21	localhost          Connected 

On each host you will find the information of the peer in /var/lib/glusterd/peers/<UUID>

Now you have all the peers added to the pool, you will need for the gluster-volume.