- 1 CTDB Project
- 2 Project Tasks
- 2.1 Hardware acceleration
- 2.2 CTDB API
- 2.3 Code s3/s4 databases ontop of ctdb api
- 2.4 Code client CTDB api on top of dumb tdb
- 2.5 Prototype CTDB library on top of UDP/TCP
- 2.6 Setup standalone test environment
- 2.7 Code CTDB test suite
- 2.8 Recovery
- 2.9 IP Takeover
- 2.10 Work out details for persistent tdbs
- 2.11 Wireshark dissector
- 2.12 Filter driver for Windows
This project aims to produce an implementation of the CTDB protocol described in the Samba & Clustering page
- Andrew Tridgell
- Alexander Bokovoy
- Aleksey Fedoseev
- Jim McDonough
- Peter Somogyi
- Volker Lendecke
- Ronnie Sahlberg
- Sven Oehme
- Michael Adam
Setting Up CTDB
See the CTDB Setup page for instructions on setting up the current CTDB code, using either loopback networking or a TCP/IP network
- 27th April 2007: First usable version available
- 3d June 2007: pCIFS using Samba and CTDB works reliable in tests. NFS clustering has been added and initial tests pass.
- 27th January 2009: Samba 3.3.0 released - the first Samba version with full CTDB support in the vanilla sources
The initial work will focus on an implementation as part of tdb itself. Integration with the Samba source tree will happen at a later date. Work will probably happen in a bzr tree, but the details have not been worked out yet. Check back here for updates.
(note: Peter is looking at this one)
We want CTDB to be very fast on hardware that supports fast messaging. In particular we are interested in good use of infiniband adapters, where we expect to get messaging latencies of the order of 3 to 5 microseconds.
From discussions so far it looks like the 'verbs' API, perhaps with a modification to allow us to hook it into epoll(), will be the right choice. Basic information on this API is available at https://openib.org/tiki/tiki-index.php
The basic features we want from a messaging API are:
- low latency. We would like to get it down to just a few microseconds per message. Messages will vary in size, but typically be small (say between 64 and 512 bytes).
- non-blocking. We would really like an API that hooks into poll, so we can use epoll(), poll() or select().
- If we can't have an API that hooks into poll() or epoll(), then a callback or signal based API would do if the overheads are small enough. In the same code we also need to be working on a unix domain socket (datagram socket) so we'd like the overhead of dealing with both the infiniband messages and the local datagrams to be low.
- What we definately don't want to use is an API that chews a lot of CPU. So we don't want to be spinning in userspace on a set a mapped registers in the hope that a message might come along. The CPU will be needed for other tasks. Using mapped registers for send would probably be fine, but we'd probably need some kernel mediated mechanism for receive unless you can suggest a way to avoid it.
- ideally we'd have reliable delivery, or at least be told when delivery has failed on a send, but if that is too expensive then we'll do our own reliable delivery mechanism.
- we need to be able to add/remove nodes from the cluster. The Samba clustering code will have its own recovery protocol.
- a 'message' like API would suite us better than a 'remote DMA' style API, unless the remote DMA API is significantly more efficient. Ring buffers would be fine.
An abstract interface can be found here: CTDB_Project_ibwrapper Please note this interface should be able to cover more possible implementations.
TODOs regarding this interface:
- verify implementability
The CTDB API is now fairly stable. Communications between samba and CTDB is across a domain socket /tmp/ctdb.socket. The API contains the following PDUs :
CTDB_REQ_CALL Fetch a remote record CTDB_REPLY_CALL CTDB_REQ_DMASTER Transfer a record back to the LMASTER CTDB_REPLY_DMASTER Transfer a record from the LMASTER to a new DMASTER CTDB_REPLY_ERROR CTDB_REQ_MESSAGE Send a message to another client attached to a local or remote CTDB daemon CTDB_REQ_CONTROL Get/Set configuration or runtime status data CTDB_REPLY_CONTROL CTDB_REQ_KEEPALIVE
Of these, the only PDUs used by a client connecting to CTDB are:
CTDB_REQ_CALL Fetch a remote record CTDB_REQ_MESSAGE Send a message to another client attached to a local or remote CTDB daemon CTDB_REQ_CONTROL Get/Set configuration or runtime status data
Code s3/s4 databases ontop of ctdb api
All important temporary databases have now been converted to CTDB and demonstrated.
Code client CTDB api on top of dumb tdb
The ctdb branch for samba3 now implements a simple api ontop of CTDB. The record header has been expanded to contain a "dmaster" field which allows the samba daemon to determine whether the current version of this record is held locally in the local tdb and if so samba daemon will access the record immediately without any involvement of the ctdb daemon.
If the record is not stored locally, samba will request that the ctdb daemon will locate the most current version of the record in the cluster and transfer it to the local tdb before the samba daemon will access it the normal way out of the locally held tdb.
The process used in the client can be described as :
1 Lock record in TDB 2 Read CTDB header from the record and check if DMASTER is this node
If we are DMASTER for this record: 3 If the current node is the DMASTER for the record then operate on the record and unlock it when finished.
If we are NOT DMASTER for this record 4 Unlock the record. 5 Send a CTDB_REQ_CALL to the local daemon to request the record to be migrated onto this node. 6 Wait for the local daemon to send us a CTDB_REPLY_CALL back, indicating the record is now held locally. 7 Goto 1
Prototype CTDB library on top of UDP/TCP
Setup standalone test environment
This test environment is meant for non-clustered usage, instead emulating a cluster using IP on loopback. It will need to run multiple instances talking over 127.0.0.X interfaces. This will involve some shell scripting, plus some work on adding/removing nodes from the cluster. It might be easiest to add a CTDB protocol request asking a node to 'go quiet', then asking it to become active again later to simulate a node dying and coming back.
Code CTDB test suite
(note: jim is looking at this one)
This reflects the fact that I want this project to concentrate on building ctdb on tdb + messaging, and not concentrate on the "whole problem" involving Samba until later. We'll do a basic s3/s4 backend implementation to make sure the ideas can work, but I want the major testing effort to involve simple tests directly against the ctdb API. It will be so much easier to simulate exotic error conditions that way.
A recovery mechanism has been implemented in CTDB.
One of the nodes will by an election process become the recovery master which is the node that will monitor the cluster and drive the recovery process when required. This election process is currently based on the VNN number of the node and the lowest VNN number becomes the recovery master.
The daemon that is designated the recovery master will continuously monitor the cluster and verify that the cluster information is consistent.
To ensure that there can only be one recovery master active at any given time a file held on shared storage is used. To become a recovery master, a node must be able to aquire an exclusive lock on that file.
The recovery process consists of :
- Freezing the cluster. This includes locking all local tdb databases to prevent any clients from accessing the databases while recovery is in progress.
- Verifying that all active nodes have all databases created. And if required create the missing databases.
- Pull all records from all databases on all remote nodes and merge these records onto the local tdb databases on the node that is the recovery master. Merging of records are based on RSN numbers.
- After merging, Push all records out to all remote nodes.
- Cleanup and delete all old empty records in all databases.
- Assign nodes to takeover the public ip address of failed nodes.
- Build and distribute a new mapping for the lmaster role for all records (the vnn map)
- Create a new generation number for the cluster and distribute to all nodes.
- Update all local and remote nodes to mark the recovery master as the current dmaster for all records.
- Thawing the cluster.
Each CTDB node is assigned two ip addresses, one private that is tied to a physical node and is dedicated to inter-CTDB traffic only and a second "public" ip address which is the address where clustered services such as SMB will bind to.
The CTDB cluster will ensure that when physical nodes fail, the remaining nodes will temporarily take over the public ip addresses of the failed nodes. This ensures that even when nodes a temporarily/permanently unavailable, the public ip addresses assigned to these nodes will still be available to clients.
The private CTDB address is the primary ip address assigned to the interface used by the cluster and is the address which will show up in ifconfig. To view which public service addresses are served by a specific node you can use
ip addr show eth0
which will show all ip addresses assigned to the interface.
When a physical node takes over the public ip address of a failed node it will first send out a few Gratious ARPs to ensure that the arp table is updated to reflect the new physical address that serves that public ip address on all locally attached hosts, secondly the new node will also send a few "tcp tickles" to ensure that all clients that have established tcp connections to the failed node immediately detects that the tcp connections have terminated and needs to be recovered.
Work out details for persistent tdbs
this will need some more thought - its not our top priority, but eventually the long lived databases will matter.
There is a basic dissector for CTDB in current SVN for wireshark. This dissector follows development and changes of the protocol.
Filter driver for Windows
A filter driver could be developed for windows to monitor all calls and perform reconnect and reissuing of calls during/after recovery events have occured. this would greatly enhance the ability of windows applications to survive a cluster node failure and recovery.