Bidirectional Rsync/Unison based SysVol replication workaround: Difference between revisions

From SambaWiki
m (→‎FAQ: add more than one dc)
(Removed unnecessary install procedure and github branch stuff)
Line 18: Line 18:


I don't see any package but osync available on
I don't see any package but osync available on
[http://www.netpower.fr/projects/osync/osync.v1.00.tar.gz]http://www.netpower.fr/projects/osync/osync.v1.00.tar.gz
[https://github.com/deajan/osync]https://github.com/deajan/osync


You can then install osync with the following commands
== Getting Osync ==
tar xvf osync.v1.00.tar.gz
At the time of writing this Osync is still at v.100pre.
cd ./osync
However, you should always get a stable branch when it is available.
sh ./install.sh
We are getting it done using master branch.
wget https://raw.githubusercontent.com/deajan/osync/master/osync.sh
chmod +x osync.sh
Move osync to /usr/bin/ or your preferred dir
mv osync.sh /usr/bin/


This will copy osync to /usr/local/bin
== Getting Osync Configuration ==
wget https://raw.githubusercontent.com/deajan/osync/master/sync.conf
Move it to /etc/osync/
mkdir /etc/osync/
mv sync.conf /etc/osync/sync.conf


=== Setup on the Domain Controller with the PDC Emulator FSMO role ===
=== Setup on the Domain Controller with the PDC Emulator FSMO role ===
Line 40: Line 32:
* rsync is installed on both server
* rsync is installed on both server
* sysvol is located /var/lib/samba/sysvol on both DC1 and DC2
* sysvol is located /var/lib/samba/sysvol on both DC1 and DC2
* osync is located /usr/bin/osync
* osync is located /usr/local/bin/osync
* osync.conf is located /etc/osync/sync.conf
* sync.conf is located /etc/osync/sync.conf
* DC1 is at DC1
* DC1 is at DC1
* DC2 is at DC2 (And already join DC1)
* DC2 is at DC2 (And already join DC1)
Line 74: Line 66:
Osync have also backup and soft delete which will kept a copy of deleted files and folder.
Osync have also backup and soft delete which will kept a copy of deleted files and folder.
You can choose to enable them.
You can choose to enable them.
:'''Branch Fix#22 fix the soft delete issue you can get them from the url below, however, it should be check in to stable branch soon.'''

wget https://raw.githubusercontent.com/deajan/osync/fix%2322/osync.sh

Osync have one benefit as it will only send email alert if there is problem.
Osync have one benefit as it will only send email alert if there is problem.



Revision as of 15:21, 21 July 2015

Introduction

Samba AD currently doesn't provide support for SysVol replication. To achive this important feature in a Multi-DC environment, until it's implemented, workarounds are necessary to keep it in sync. This HowTo provides a basic workaround solution based on Osync.

Information on Osync replication

This HowTo describes a solution for SysVol replication, that is based on Osync (rsync is required). As Compare to the rsync method, it is bidirectional. But this howto only cover two DC setup.

It have the following advantages:

  • setup is fast
  • configuration is very easy
  • Can work with windows (Todo)

In this setup we will use rsync through a SSH tunnel.

Setup the SysVol replication

Installation

I don't see any package but osync available on [1]http://www.netpower.fr/projects/osync/osync.v1.00.tar.gz

You can then install osync with the following commands

tar xvf osync.v1.00.tar.gz
cd ./osync
sh ./install.sh

This will copy osync to /usr/local/bin

Setup on the Domain Controller with the PDC Emulator FSMO role

Some assumption:

  • You are running all command as root.
  • rsync is installed on both server
  • sysvol is located /var/lib/samba/sysvol on both DC1 and DC2
  • osync is located /usr/local/bin/osync
  • sync.conf is located /etc/osync/sync.conf
  • DC1 is at DC1
  • DC2 is at DC2 (And already join DC1)
  • sysvolsync log is located /var/log/osync_*.log
  • rsync must support extended ACLs
  • Install rsync by using your package manager or compile from source. Make sure, that you use a version that supports extended ACLs!
  • sysvol must be on disk which is mounted to support acl and also xattr
  • We don't need to setup rsync server.

Change the path if that don't fit your setup.

Creating SSH Public Key and ssh-copy to DC2

ssh-keygen -t dsa
ssh-copy-id -i ~/.ssh/id_dsa.pub root@DC2

You can try to access DC2 via ssh

ssh DC2

Osync Configuration Setup on DC1

Edit the /etc/osync/sync.conf and make some changes

#!/usr/bin/env bash
SYNC_ID="sysvol_sync"
MASTER_SYNC_DIR="/var/lib/samba/sysvol"
SLAVE_SYNC_DIR="ssh://root@DC2:22//var/lib/samba/sysvol"
SSH_RSA_PRIVATE_KEY="/root/.ssh/id_rsa"
PRESERVE_ACL=yes
PRESERVE_XATTR=yes
SOFT_DELETE=yes
DESTINATION_MAILS="your@email.com"

Osync have also backup and soft delete which will kept a copy of deleted files and folder. You can choose to enable them. Osync have one benefit as it will only send email alert if there is problem.

Setup on DC2

  • On DC2 Install rsync by using your package manager or compile from source. Make sure, that you use a version that supports extended ACLs!
  • Shutdown DC2 Samba AD DC
mv /var/lib/samba/private/idmap.ldb /var/lib/samba/private/idmap.ldb.backup"
rm /var/cache/samba/gencache.tdb"
  • Copy idmap.ldb from DC1 to sync the idmap.
  • Run the following command on DC1
scp /var/lib/samba/private/idmap.ldb root@DC2:/var/lib/samba/private/

1st Try

What happen is we use rsync to create the directory structure with extended attributes Than unison setup copies only the extened attributes on files.


Please make a backup on you sysvol just in case.

/usr/bin/osync.sh /etc/osync/sync.conf --dry --verbose

If this run successfully let remove the --dry and execute it.

/usr/bin/osync.sh /etc/osync/sync.conf --verbose

Add to Crontab on DC1

On DC1 run the following:

crontab -e 
*/5 * * * * root  /usr/bin/osync.sh /etc/osync/sync.conf  --silent
Warning: Make sure that the destination folder is really your SysVol folder, because the command will replicate to the given directory and sync everything in it that isn't also on the source! You could damage your system! So check the output carefully if the replication is doing, what you expect!

When you try to resync the folder

Warning: Please follow the steps below OR you can end up with an empty sysvol folder.
  1. Disable Cron on DC1, like Add a "#" on the line with crontab -e
  2. Check is any rsync or osync are currently running in ps -aux if yes, wait for it to finished OR kill it (if it is zombie)
  3. Remove the .osync_workdir hash files on both DC1 and DC2 on MASTER/SLAVE_SYNC_DIR "/var/lib/samba/sysvol"
  4. Now check your sysvol and resync
  5. Confirm that everything is ok again
  6. Re-enable the Cron on DC1 again

FAQ

  • How can I do this on windows?
    • I don't have an answer, please post on the mailing list


  • What to do if I've more than one DC?
    • By Theory, We would just make more cron jobs on DC1 and the complete sync will be perform next sync to all server. (Not tested)
    • Something like:
    • DC1 <> DC2
    • DC1 <> DC3
    • DC1 <> DC2


  • Why can't I simply use a distributed filesystem like GlusterFS, Lustre, etc. for SysVol?
    • A cluster file system with Samba requires CTDB to be able to do it safely. And CTDB and AD DC are incompatible. Please check on the reply from Samba Developer on the mailing list .