Back up and Restoring a Samba AD DC
This page describes creating a backup on Samba v4.9 onwards. For backups on Samba v4.0-v4.8, see here for more details.
- 1 Overview
- 2 So which backup should I use?
- 3 Testing the backup restoration
- 4 Online DC backup
- 5 Offline/local DC backup
- 6 Domain rename backup
- 7 Untarring backups
- 8 Restoring the domain
- 9 Restoring the backup-file
- 10 Recommended strategy
- 11 Troubleshooting
Samba backups provide a way to recover your Samba network, in the unlikely event that a catastrophic failure of the domain occurs.
There are a few different flavours of backup, which work in different ways and achieve different things:
- Online. This takes a clone of a running DC's database. It's similar in functionality to joining a new DC to the network.
- Offline (or 'local'). This backs up the Samba files as they appear on disk. This includes replication meta-data that's local to this particular DC and which is not included in online backups. It can also create a backup file when the DC is offline (i.e. the
sambaprocess is not actually running).
- Rename. This produces a backup file with the domain renamed, and is intended as only a temporary replacement.
These different types of backup have several things in common. The backups are all produced using a variant of the 'samba-tool domain backup' command. Each command creates a .tar.bz2 backup-file which contains an entire backup of the domain (based on a given DC). The backup-file can then be used to restore the domain using the 'samba-tool domain backup restore' command.
Note that the backup-file is a backup of your domain, not your DC. Restoring the backup-file will create a brand new DC with your domain's information. To restore subsequent DCs you must then join fresh new DCs to the restored DC.
So which backup should I use?
This is a difficult question to answer, as it somewhat involves predicting how your Samba domain will fail. It also depends on how you plan to react to the failure. By creating a backup, you may be trying to achieve one of several different objectives:
- Provide temporary replacment DC(s), which will buy you time while you troubleshoot and fix the problems on your original Samba network.
- Provide a long-term replacement for your domain, i.e. you plan to completely discard your failed domain and rollback to the last backup taken.
- Provide forensics on why the domain failure occurred in the first place, e.g. if a database corruption occurred, what factors may have led to the problem?
- Provide a 'good working state' database that can be used as a guide for repairing and recovering deleted or corrupted objects in the production database.
The rename backup works best for providing a temporary replacement domain, however, it is no good as a long-term replacement for the domain. Normally you can't run restored DCs and troubleshoot the failed domain DCs at the same time, because both will be using the same domain name (which will cause even more wild and weird problems to appear in your network). However, because the renamed backup is using a different domain name, it means you can safely run both the restored domain and the original domain in parallel.
The online backup works best for providing a long-term replacement for your domain. It can be used as a temporary replacement, but you cannot easily troubleshoot the failed domain DCs at the same time. Investigating the reason behind the failure of a Samba domain could be time-consuming and technically complex work. If, in the event of a catastrophic domain failure, you don't intend to investigate the problem and just want to revert back to a older copy of a working domain, then this is the best option for you.
The offline backup works best for forensics purposes, as it contains additional data that is not normally replicated. However, note that the offline backup-file contains all the sensitive/secret information for your entire domain, so you still may not be able to share this backed-up information easily with Samba developers or mailing-lists. Also note that because the backup is copying the actual database on disk, there is potentially more chance that a corruption in the database is copied through to the backup.
If you want to create multiple different types of backups, note that the details of the backup are saved in a 'backup.txt' file within the backup-file itself.
Testing the backup restoration
The often overlooked step in any disaster recovery plan is testing that your recovery system actually works before you need to put it into practice. Creating the backup-file is not much good if
samba fails to start up on your restored DC.
Note that the backup/restore commands are new to Samba v4.9, and there may be something specific to your network which means they don't work as well as intended. It's better to find any problems now (and report them to the Samba mailing-list), rather than in an emergency.
Unfortunately, testing a Samba backup is hard to do. Because the online and offline backups use the exact same domain information as your production network, it is not safe to run
samba on a restored backup - the restored DC will interfere with your production network traffic.
Here are a few options to help you gain confidence that your Samba backup will actually be useful.
- If you're generating a 'rename' backup, then it's always safe to restore the backup-file onto a new DC and start
sambaon it. So you can always sanity-check that your rename backup works successfully. A rename backup is quite similar to an online backup, so if your rename backup works, then you can have some confidence that your online backup would probably work too.
- It's always safe to restore the backup-file to disk, as long as you don't actually start
sambaon the restored database. You could then use tools like ldbsearch (by specifying the local filepath of the database on disk) to sanity-check database objects were backed up correctly.
- If you just want to get a better feel for what the various backup options do, one option is to create a samba lab-domain, and then create and restore online/offline backups within the lab domain itself.
- Another option is configure your network switches to completely isolate the restored DC from the rest of your Samba network, although in practice this proves quite tricky to get right.
Note that the backup tool creates a 'warts and all' copy of the domain database. If you don't run
samba-tool dbcheck over your Samba database regularly, then it's worth getting into the habit, especially before you generate a new backup. Otherwise, any problems in your database will persist right through a backup and restore of your domain. Dbcheck will report any obvious problems that exist in your database, and provides a '--fix' option that will resolve the problems for you.
Online DC backup
To create an online backup, use:
sudo samba-tool domain backup online --target-dir=<output-dir> --server=<DC-server> -UAdministrator
This command can be run locally on the DC or remotely. If running the command remotely, you may want to specify a
--configfile option so that the correct smb.conf settings get included in the backup.
Offline/local DC backup
To create a offline backup, login on the DC you're backing up, and simply specify the target-directory location to write the backup-file to. E.g.
sudo samba-tool domain backup offline --target-dir=<output-dir>
Note that despite this option's name, the DC does not actually need to be offline when running this command. The tool is simply backing up the local files and it has sufficient locking in place to ensure the backup is generated safely.
Domain rename backup
For more details on creating a rename backup, see Domain rename tool.
If you simply want to use the backup for forensic purposes (i.e. interrogating the details of specific database objects in a 'good' state), then it's safe to just untar the backup-file and query the database directly on disk. Note that you cannot run
samba on an untarred backup - you must use the restore command to do this.
Restoring the domain
In the event of a catastrophic domain failure, to restore the domain from backup-file you would do the following:
sambaon all the old DCs. (Unless you're using a renamed backup, in which case you can skip this step).
- Run the 'samba-tool domain backup restore' command to restore the domain database on a single new DC. See below for more details.
sambaon the new DC.
- Re-add the old DCs back to the network by joining them to the restored DC, e.g.
samba-tool domain join <dns-realm> DC --server=<restored-dc>
- If you're using a renamed backup, you would then need to re-configure your network appliances so that traffic is redirected to the restored domain, instead of the failed/original domain.
Note that the backup-file is recovering the entire domain, not a specific DC. The 'samba-tool domain backup restore' step is only done once, which re-creates the domain on a single DC. All old DCs must then be re-joined to the restored DC, in order to rejoin the domain.
Restoring the backup-file
The step to restore a backup is similar to the 'domain provision' you did back when you first setup your Samba network, except this time the backup contains all the database objects you've added since then. Similar to doing a provision, you need to specify a new DC when you run the restore command. This new DC must not have existed previously in the Samba network. The restore command will look something like:
sudo samba-tool domain backup restore --backup-file=<tar-file> --newservername=<DC-name> --targetdir=<new-samba-dir>
Note that the target-directory specified must be empty (or non-existent). This means it's not practical to restore the domain database back into the default installation location (e.g. /usr/local/samba). Instead, we recommend that you restore the domain database into a different targetdir, and then use the '-s' (or '--configfile') option when running
samba -s <targetdir>/etc/smb.conf
Specifying the restored smb.conf will mean that Samba will use the database files in the correct location.
samba on the restored DC, you should double-check the restored smb.conf settings are correct. It may also be helpful to run
samba_dnsupdate (although this still gets run automatically when you start
Restoring the backup-file has a couple of minor annoyances:
- Having to use a different directory to the default installation location.
- Having to specify a different DC server-name to what was previously in your network.
The simple way to minimize these annoyances is to use a temporary server (or VM) for your restored DC. i.e.
- Restore the backup-file onto the temporary DC and start Samba.
- Rejoin the original DCs to the temporary DC one at a time. You can re-use the same server-name and default installation location during the join.
- Once all the original DCs have joined the restored domain, you can remove the temporary DC (i.e. using 'samba-tool domain demote'). Your network of DCs should now be exactly the same as it was previously (except hopefully now in a valid working state!).
Note that if the backup or restore commands unexpectedly throw an error, they may leave behind a temporary directory in the
--targetdir you specified. These may help to provide clues as to why the failure occurred. If you're running the restore command, then you will need to clean these up manually before re-running the command.
- Note that you should run the backup as root. Online backups can actually succeed as a non-root user, but it will cause you headaches later when you try to restore it.
- For 'online' or 'rename' backups, sanity-check that the credentials and server details you're using are correct. E.g. try:
ldbsearch -H ldap://<server> -UAdministrator
- Try increasing the debug-level to see if that tells you more about the failure. E.g. add the
--debug=3option to the command.
- The 'online' and 'rename' commands work in a very similar way to a joining a DC. If joining a DC is known to fail on your network, then these commands are unlikely to work either. If you see the 'Committing SAM database' and 'Cloned domain <domain>' messages, then the join-like part of the backup has likely succeeded.
- The backup tools do not work against a Windows DC (mostly just backing up the sysvol files fails). If you have a mixed DC domain, then backup a Samba DC rather than a Windows DC.
- The restore command needs to be run as root. Part of the backup process involves preserving and restoring the NTACLs of the sysvol files, and some of the file operations involved require root permissions. If you're not root, then you'll probably see an error like:
ERROR(<type 'exceptions.TypeError'>): uncaught exception - (1, 'Operation not permitted') File "bin/python/samba/netcmd/__init__.py", line 177, in _run return self.run(*args, **kwargs) File "bin/python/samba/netcmd/domain_backup.py", line 520, in run backup_restore(sysvol_tar, dest_sysvol_dir, samdb, smbconf) File "bin/python/samba/ntacls.py", line 589, in backup_restore ntacls_helper.setntacl(dst, ntacl_sddl_str) File "bin/python/samba/ntacls.py", line 445, in setntacl return setntacl(self.lp, path, ntacl_sd, self.dom_sid) File "bin/python/samba/ntacls.py", line 214, in setntacl ndr_pack(ntacl))
--newservernameyou specify for the restored DC must not already exist in the original domain. Otherwise you'll see an error like:
Adding CN=PROD-DC,OU=Domain Controllers,DC=lab,DC=example,DC=com ERROR(ldb): uncaught exception - Entry CN=PROD-DC,OU=Domain Controllers,DC=lab,DC=example,DC=com already exists File "bin/python/samba/netcmd/__init__.py", line 177, in _run return self.run(*args, **kwargs) File "bin/python/samba/netcmd/domain_backup.py", line 439, in run ctx.join_add_objects(specified_sid=dom_sid(sid)) File "bin/python/samba/join.py", line 625, in join_add_objects ctx.samdb.add(rec, controls=controls)
- If the backup command was run locally on the DC, then the backup-file should contain the DC's smb.conf. However, the smb.conf in the backup-file may contain 'interfaces' configuration that doesn't match the IP addresses on the DC you're restoring on. If this happens, you'll get an error like:
Looking up IPv4 addresses WARNING: no network interfaces found No IPv4 address will be assigned Looking up IPv6 addresses WARNING: no network interfaces found No IPv6 address will be assigned ERROR: Please specify a host-ip for the new server
- You can avoid this problem by specifying a
--host-ipargument during the restore. This should only affect rename backups.
If you ran the backup as a non-root user, the restore will still succeed, but you'll hit errors when you try to start
sudo samba -s /tmp/online4/etc/smb.conf -i -d 3 samba version 4.10.0pre1-DEVELOPERBUILD started. Copyright Andrew Tridgell and the Samba Team 1992-2018 ... directory_create_or_exist_strict: invalid ownership on directory /tmp/restore/private/msg.sock exit_daemon: STATUS=daemon failed to start: Samba failed to setup parent messaging, error code -1073741801
- You could chown your way out of this, but it's a lot simpler just to run the backup command as root.