1.0: Configuring Samba

Revision as of 04:42, 25 January 2007 by Asender (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

1.0: Configuring Samba

Samba is an ambitious project to provide solutions for file & print sharing between Linux ™ and Microsoft Windows.

If you are familiar with Samba this document may give you some ideas of how you can bundle different software packages together to produce a very reliable configuration.

We are building a fault tolerant domain controller, which provides you with the following;


Samba Configuration

- Primary Domain Controller

- Backup Domain Controller


A master domain controller, that provides authentication through the use of LDAP

A slave domain controller that can load balance client login requests which also provide redundancy through the use of a replica LDAP database.


Step1

Get the latest version of samba http://us4.samba.org/samba/ftp/samba-latest.tar.gz

It is essential that both the PDC and BDC are running the same version of samba.


[root@node1 samba]# wget http://us4.samba.org/samba/ftp/samba-latest.tar.gz

--19:28:04-- http://us4.samba.org/samba/ftp/samba-latest.tar.gz

          => `samba-latest.tar.gz'

Resolving us4.samba.org... 192.48.170.15

Connecting to us4.samba.org|192.48.170.15|:80... connected.

HTTP request sent, awaiting response... 200 OK

Length: 17,704,221 (17M) [application/x-tar]

100%[====================================>] 17,704,221 53.01K/s ETA 00:00

19:33:40 (51.62 KB/s) - `samba-latest.tar.gz' saved [17704221/17704221]